Since the equation for watts is:
Volts * Amps = Watts
that would mean
12 Volts * 1 Amp = 12 Watts
10
ohm is used to measure resistance of electric current. Ampere is used to measure electric current. volt is used to measure voltage.
The 5 amp fuse has many wattages that it can protect. It depends on the voltage of the circuit that the fuse is protecting. Use the following formula, Watts = Volts x Amps. For example 120 volts x 5 amps = 600 watts, 240 volts x 5 amps = 1200 watts, 480 volts x 5 amps = 2400 watts and 600 volts x 5 amps = 3000 watts.
A milliampere.
milliamphere Hour or one-thousandth of an ampere-hour
It depends on the voltage of the compressor. Two horse power (electric) is 1492 watts, but watts are volts times amps, so you need to know the voltage. Since the motor is an inductive load, you will also need to know the power factor, so as to compensate for true vs apparent power.
There are is no watts in an amp. A watt is the product of amps x volts.
Do you mean 'megavolt ampere' (MV.A) or 'millivolt ampere' (mV.A)? By using the incorrect symbol ('mva'), this is not clear.To determine the apparent power, in volt amperes, you divide the true power, in watts, by the power factor of the load. One volt ampere is one-millionth of a megavolt ampere ('MV.A' -not 'mva') -assuming you don't mean 'millivolt ampere' ('mV.A')!
About as much as 15 typical (60watt each) light bulbs together. Or expressed in horsepower: about 1.2Hp Mains volts and ampere: 230 volt at 3.91 ampere = 900watt 110 volt at 8.18 ampere = 900watt
770 watts.
Watts is a unit of power, whereas Amperes is a unit of current. They're related though, along with Voltage, Resistance etc. But they're not the same thing, so to answer your question: There are no watts in an ampere! Power (W) = Voltage (V) x Current (I)
Watts = Amps X Volts Grab your calculator!
There are zero watts in 300 amps. Watts are the product of amps times volts.
600 watts
Watts (or kilowatts) and amperes are used to measure different things. Watts is a unit of power; ampere is a unit of current. The relationship (for direct current) is: watt = ampere x volt For AC, the relationship is a bit more complicated: watt = ampere x volt x power factor However, the power factor is often close to one.
If the 12V source can deliver 100 Ampere, then yes. If it can't, then no. (remember watts / volts = amps)
Only when the load is purely resistive.
As watts are made of volts times amps, the answer would be 0.660kw.