0
The answer depends on how you group the numbers:
(5+1)x10 = 60
5 + (1x10) = 15
Both correspond to the question as it was stated in words.
Wiki User
∙ 7y ago
Add your answer:
Earn +20 pts
What is 1x10 to the power of negative 5?
-50.
What is 0.00001 as a power of 10?
1x10^-5
How do you write 1 hundred thousand to the power of ten?
One hundred thousand in Scientific notation is 1x10^5, (^ meaning to the power of), therefore One hundred thousand to the power of ten is (1x10^5)^10 = 1x10^50, using basic rules of powers or 1 followed by 50 zeros.
What is 1x10 5?
If you mean 1x105, then the answer would be 100,000 (i.e the number one followed by five zeros).
What is 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 plus 5 equal?
Note that the reason there exists a technique called multiplication is so that we do not have to perform tedious and lengthy series of addition such as the one you have presented. So, you have given us 24 of the number 5 to add. 24 x 5 = 120. (Addition form) 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 + 5 = 120
What is the OH- of H3O plus of 1x10-5?
It must be 1 x 10-9
How do you write five and one hundred millionth in decimal standard form?
5 plus 100 millionths is 5 + 1 x 10-4 = 5.0001 . 5 plus 1 hundred-millionths is 5 + 1x10-8 = 5.00000001
What is 1x10 to the power of negative 5?
-50.
What is 0.00001 as a power of 10?
1x10^-5
How big is 10 microns?
A micron (µm), presumably referring to a Micrometre is one millionth of a meter (1x10-6 m ). Thus, making 10 microns (1x10-5 m). A micron (µm), presumably referring to a Micrometre is one millionth of a meter (1x10-6 m ). Thus, making 10 microns (1x10-5 m).
What is hydraulic conductivity of soil?
This depends on the soil! Cohesionless coarse grained soils with high gravel contents may have high hydraulic conductivity on the order of 1 to 1x10-1 m/s. Mixed sands and gravels are on the order of 1x10-1 to 1x10-3 m/s. Finer sands approximately 1x10-3 to 1x10-4, and fine grained soils such as silty sands may be in the range of 1x10-5 to 1x10-7 m/s. Very fine grained cohesive clay soils have very low hydraulic conductivity values ranging from 1x10-7 to 1x10-13 m/s.
How do you write 1 hundred thousand to the power of ten?
One hundred thousand in Scientific notation is 1x10^5, (^ meaning to the power of), therefore One hundred thousand to the power of ten is (1x10^5)^10 = 1x10^50, using basic rules of powers or 1 followed by 50 zeros.
How much light has the higher frequency a light with wave length of 1x10-7meters or 1x10-5?
Always the lower wavelength lambda has a higher frequency f and the higher wavelength has the lower frequency. Speed of medium c = lambda times frequency f = c / wavelength lambda = c / f The wavelength 1x10-5 meters has a higher frequency than the wavelength 1x10-7 meters.
What is the pH if OH is 1x10 5 M?
- log(1 X 10^-5 M) = 5 14 - 5 = 9 pH ----------
What is 1x10 5?
If you mean 1x105, then the answer would be 100,000 (i.e the number one followed by five zeros).
Daily recommended allowance of vitamin d in scientific notation is 1x10 -5 grams this is equal to what?
5,000g
How many meters of water is 1 bar?
P=rho*g*h P= pressure rho= density = 1000 kg/m^3 at about 20C g= gravitational constant on earth at sea level = 9.81 m/s^2 h= height P=1 bar=1x10^5 Pascals = 1x10^5 N/m^2 (based on the definition of the Pascal unit) since by definition 1 Newton= 1 kg*m/s^2 1x10^5 N/m^2= 1x10^5 kg*m^2/(m^3*s)= 1x10^5 kg/(m^2*s) 1x10^5 kg/(m^2*s) = 1000 kg/m^3 *9.81m/s^2 * h solving for h yields: h= 1x10^5/(1000*9.81)= 10.19367 meters This value might vary slightly due to the affect of temperature on the density of water.
