Best Answer

Volume of rectangular tin = (8 *8 * 14) ft3 = 896 ft3

Volume of cylindrical tin = (22/7 * 4 *4 *14) ft3 = 704 ft3

Difference in their capacities = (896 - 704) ft3 = 192 ft3

www.examville.com

Q: A powder tin has a square base with side 8 ft and height 14 ft Another tin has a circular base with diameter 8 ft and height 14 ft Find the difference in their capacities?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

there is a big difference between circular and linear convolution , in linear convolution we convolved one signal with another signal where as in circular convolution the same convolution is done but in circular patteren ,depending upon the samples of the signal

"Circular functions" is basically another name for "trigonometric functions".

We had this question just the other day as well. 28-21, you do the math.

28 - 21 = 7Which is a fairly silly answer as there are no 21" bike wheels. The spoke thing is quite misleading, as there are several things that aren't mentioned here that affect spoke length.If stood side by side the 28" wheel will reach 7" higher than the 21" wheel.7 inches difference . As 28-21=7The diameter of one bicycle wheel is 28 inches and its spokes run from the hub (or center) to the edge of the rim. The diameter of another bicycle wheel 21 inches. What is the difference in inches between the length of the spokes of the two wheels?

1/2 the diameter

Related questions

Main one is bore diameter. Another answer: 270=.277 diameter 30-06=.308 diameter

there is a big difference between circular and linear convolution , in linear convolution we convolved one signal with another signal where as in circular convolution the same convolution is done but in circular patteren ,depending upon the samples of the signal

In a circular linked list every node is connected to another node. In a non-circular linked list. There are definitely starting and ending nodes are lacking an incoming and outgoing link, respectively.

circular model is simultaneously it talks back from the sender to sender. while, helical model is a upward to downward communication - from one person to another or from the group.

The diameter is a straight line going from a point on the circumference of a circle, through the centre of the circle, to another point on the circumference. It can be of any length. A metre is a standard unit for measuring length.

"Circular functions" is basically another name for "trigonometric functions".

It's a vault made of two intersecting barrel vaults (a barrel vault is basically a series of ordinary semi-circular arches, making for a long semi-circular ceiling) that have the same diameter as one another. See the wikipedia article on groin vaults for more information.

If you have one reference that leads to another and then another which finally comes back to the first, making a circle or closed loop, this is a circular reference.

14 - 10.5 = 3.5. The difference is 3.5 inches.

spiral round about

You get another Pi, only difference is this on is missing the "e" at the end. (Doesn't taste quite so good either)

Yes, a "20 gauge" is just another word for the .410 shotgun.