110 yards = 20 rods
The original answer (below) was off by a factor of 3, a surveyor's rod = 5.5 yards. So (2 yards)/(5.5 yards/rod) = 4/11 rod or about 0.364 rod.This is the original answer refers to fencing rod, but this is actually 5.5 yards (not feet) as originally stated. I found reference to an 80 rod roll equal to 1320 feet (see link).
80 rods
1 chain = 4 rods.
There are 320 rods in a mile. Therefore, 80 rods is equal to 80/320 = 0.25 miles.
There is no simple answer because a base 10 rod can be of any length. All that is required is that all the rods from one manufacturer are the same length - which is also ten times the units pieces, and so on.
1 yards = 0.181818182 rods2 yards = 0.363636364 rods
One rod is equal to 5.5 yards. Therefore, 1 mile is equal to 1760 / 5.5 = 320 rods.
184,320 rods 1,013,760 yards 3,041,280 feet 36,495,360 inches
There are 5.5 yards in one rod. Therefore, 40 rods is equal to 5.5 x 40 = 220 yards.
a rod is 5.5 yards, therefore two rods = 11 yards = 33 feet
One rod is equal to 5.5 yards. Therefore, 6 rods is equal to 5.5 x 6 = 33 yards.
I checked a few sources, which concur with 1 rod = 16.5 feet = 5.5 yards.(3 rods)x(5.5 yards/rod) = 16.5 yards.
3 Rods is the largest one. 3 feet is 1 yard 3 yards is 9 ft 3 meters is 9.84 ft or 3.28 yards or about .6 rods 3 rods is is 16.5 yards, or 49.5 ft or about 15.1 meters
40 rods equals one furlong">">
Assuming a square acre, each side would be approximately 208.7 feet, so the 4 sides would equal approximately 835 feet. A rod is 16.5 feet, so 835 divided by 16.5 equals approximately 50.6 rods.
A rod is five and a half yards. To convert from square yards to square rods (why you would want to do such a ridiculous thing, I can't imagine) you divide by 30.25, which is 5.5 squared.
Five miles equals 1,600 rods.