Study guides

Q: A swimming pool is 60 feet long and 30 feet wide how many cubic feet of water will be needed to fill the pool to a depth of 8 feet?

Write your answer...

Submit

Related questions

That is 1,800 cubic ft.

You would measure the swimming pools length, width and depth to determine how many cubic feet of water is in the swimming pool. Length x Width x depth = cubic feet. Then measure the mass of 1 cubic foot of water by building a box 1'x1'x1'. Once you know the mass of 1 cubic foot of water - you'll know the mass of the water in the swimming pool.

What's the depth? This is essential to find cubic feet. Depth x width x length = ? Cubic Feer

100

Not possible to say without any information about the depth.

Determine the cubic footage of the pool interior (Length X Width X Depth) and multiply that by 7.5, which is the approximate number of gallons per cubic foot.

5300 gallons

To calculate this the depth would also be needed

depends on how big the swimming pool is An Olympic swimming pool is a standard size so you must take the legnth times the width times the depth and convert the cubic yards to gallons.

The average depth should be 7.5 metres of water in depth.

Cannot be answered with only these measurements. You need to specify what shape the pool is. Also, for a rectangular pool, the length, width and depth are needed. For a round pool, the diameter and depth are needed.

At the same depth the pressure is greater at sea because salt water is denser than fresh water.

A swimming pool that measures 12 feet by 30 feet and has an average depth of 6 feet contains approximately 16,157 gallons of water. 12 x 30 x 6 = 2160 cubic feet 1 cubic foot = approximately 7.48 gallons 2160 x 7.48 = 16156.8

Length times width times depth will give you the volume. If you want to know how much water it will hold, take your cubic feet and divide it by 7.48051935474856

That depends on the depth of the swimming pool, and also on its exact shape.

To calculate the gallons you also need the average depth. Then you take lenth X width X average depth = cubic feet of water. cubic feet of water X 7.48 {gallons per cubic foot} = total gallons.

To calculate the gallons you also need the average depth. Then you take lenth X width X average depth = cubic feet of water. cubic feet of water X 7.48 {gallons per cubic foot} = total gallons.

20.16 cubic meters

so long as you don't touch the bottom the depth makes no difference

It is 2250 cubic feet.

7

A swimming pool that measures 12 feet by 30 feet and has an average depth of 6 feet contains approximately 16,157 gallons of water. 12 x 30 x 6 = 2160 cubic feet 1 cubic foot = approximately 7.48 gallons 2160 x 7.48 = 16156.8

This formula for swimming pool water capacity or volume is Length X Width X Average Depth X 28.32 (for liters in a cubic foot.) The equation for this pool is 18 X 33 X 4 X 28.32 Equals 67,288.32 liters in the swimming pool.

Technically, none. A square foot is a measure of area whereas it is the volume of water that is required. To convert from area to volume it is necessary to know the depth. A twelfth of a cubic foot will cover an area of one square foot to a depth of 1 inch. A cubic foot will cover it to a depth of 1 foot, 100 cubic feet will cover it to a depth of 100 feet.

length(M) x width(M) x average depth(M) you will get pool volume in cubic meter. convert it in to gallons or any other unit