The volume would be
pi*r^2*height
=pi*(3.5ft)^2*15ft
which gives an answer of 577.2676501 cubic feet.
YES. Level is interpruted to be horizontal and plumb vertical. Now, most levels have a plumb level and can be used in the vertical position. this is stil however checking for plumb and not level. Hope this helps Terry
Vertical distance above mean sea level.
VTOL - an acronym for Vertical Take-Off and Landing
Put water in the cylinder to a level that would cover the object. Drop the item in and if it sinks, read the new level on the graduations. The difference in volume between the two marks, is the volume of the item.
Note the level of water in the graduated cylinder. Place the rock into the water carefully. Note the higher level to which the water rises. The difference between the old level and the new level is the volume displaced by the rock.
In the damping level the level view and vertical spindle are crossed together...
YES. Level is interpruted to be horizontal and plumb vertical. Now, most levels have a plumb level and can be used in the vertical position. this is stil however checking for plumb and not level. Hope this helps Terry
Spirit level
invert level =high level - the reading - the diameter of pipe
A plane that can start with a vertical lift off then switch to level is called a tilt rotor aircraft.
A spirit level tells if things are horizontal or vertical
The augmented level of a product consists of all the elements that surround both the core and the actual product
Perpendicular or 90 degrees to level (horizontal level)... In other words, straight up and down.
A blind level is a level or drainage gallery which has a vertical shaft at each end, and acts as an inverted option.
Get a liquid volume measuring jug, fill it to a fixed level with water and make a note of the level = level A. Next drop in the solid object and make a note of the new level = level B.Subtract level A from level B and the difference is the volume of the solid object.
Fill a cylindrical pool (a pool with vertical sides) with water and measure the level of water in it. Sumberge the human body and measure the level of water. Volume of body = increase in volume in pool = area of cross section of pool * increase in height of water. The pool need not be cylindrical, but being so makes the calculations simpler.
A reduced level is the vertical distance between a survey point and the adopted level datum