12,000 N, since force is equal to weight in this situation
An elevator has a weight limit of 350 pounds a box of machine parts weighs 25 pounds which inequality best describes the maximum number of boxes b that the elevator can hold
When you step into an elevator and close the door, you had passed through two doors and are now standing in a box (or the elevator car) inside a vertical passageway (called the lift shaft). One door is in the walls of the floor that you got off, and the other door is part of the car itself.Inside the shaft are hoisting cables attached to the top of the car. The cables run over a sheave (pulley) connected to an electric motor at the top of the shaft. The other end of the cables is connected to a heavy steel weight called a counterweight. When the car goes up, the counterweight goes down; when the car goes down, the counterweight goes up.How the counterweight reduces to a minimum the power needed to operate the elevator ...Weight of counterweight = Weight of the car + (about) ½ of its maximum passenger loadSo when the elevator operates, it needs power only to lift the weight of the extra passengers in the car; the rest of the weight is balanced by the counterweight.
A typical material is cast iron plates or blocks made for this purpose.
Elevator Counterweight = Half of Elevator Maximum Capacity + Cab Weight For eg: 10passenger Elevator = 10*80 = 800Kgs Counter Weight is 800/2 = 400Kgs + Cab Weight This is just to create a imbalance between Elevator cab and counterweight in order to save power in the drive.
It's very important when you design the plane that the plane weight is distributed evenly. The plane need it's gravity center in the center of the fuselage (On it's wings). For example: Air Midwest Flight 5481 took-off with the more weight in the tail than in the nose, the plane entered in stall 5 seconds after take-off and crashed in a hangar killing all 19 passengers and 2 crew.
power = 40hp =29828w P=work done divided by time =>P=dW/dt=F.v where f is the force and v is the velocity v=d/t=20/16=1.25m/s =>F=P/v=29828/1.25=23862.4 N This F is the force applied by the elevator to carry itself and the passengers These forces are: Weight of the elevator Wele=600*9.81=5886N Weight of the passengers Wpas=9.81m => F-Wele-Wpas=ma for this elevator to hold the maximum number of passengers it means that the force applied by the weight of the elevator plus that of the passengers must be equal to the force provided by the motor thus rendering the elevator at rest => acceleration (a)=0 =>F-Wele-Wpas=0 =>23862.4-5886-9.81m=0 =>9.81m=17976.4 =>m=1832.5kg If the average mass of a passenger is 65 =>maximum number of passengers that can ride in the elevator are 1832.5/65=28.2 => approximately 28 passengers can ride in the elevator
time . . . . seconds mass. . . . kilograms area . . . . square meters length . . . meters weight . . . newtons volume . . . cubic meters or liters
The suitable weight for an elevator counterweight is equal to the weight of the elevator itself. This ensures that the elevator moves smoothly and safely without any jerking or swaying. ESCON Elevators use high-quality counterweights that are perfectly balanced, ensuring a smooth and comfortable ride for every passenger.
Of the maximum weight capacity of an elevator in a skyscraper (tensile strength of the elevator cable). you don't want it to snap when people are on it and send them hurtling hundreds of meters downwards.
That depends on the amount of gravity, of course. Weight = mass x gravity. Near the Earth's surface, the value for gravity is approximately 9.8 (meters per square seconds).That depends on the amount of gravity, of course. Weight = mass x gravity. Near the Earth's surface, the value for gravity is approximately 9.8 (meters per square seconds).That depends on the amount of gravity, of course. Weight = mass x gravity. Near the Earth's surface, the value for gravity is approximately 9.8 (meters per square seconds).That depends on the amount of gravity, of course. Weight = mass x gravity. Near the Earth's surface, the value for gravity is approximately 9.8 (meters per square seconds).
The elevator is accelerating downwards.
The tyres of the vehicles does take the weight of all the vehicle, so they does take the weight of passengers as well.
5.0 meters
If you divide the distance by the time, you get the average speed during that time. The weight doesn't affect the calculation.
Not really. It is not the fact of GOING UP that makes your apparent weight increase, but the fact that it is ACCELERATING UPWARD. For example, while the elevator goes up at a constant speed, your apparent weight will be the same as if it weren't moving.
If the elevator's speed is constant (acceleration is zero), regardless of whether it's up or down,then your weight in it is the same as your normal weight on the ground.It should be easy to carry a bathroom scale onto an elevator with you some day and check it out.
1200 pounds