-40
As we have formula for converting temperature C= F-32x5/9
so if we put the value -40 in Fahrenheit
C=-40-32x5/9
C=-72x5/9
C=-360/9
C=-40
and in other formula F=Cx9/5+32
so put the same value
F=-40x9/5+32
F=-360/5+32
F=-72+32
F=-40
So here prove that -40C=-40F
what is this in english i just have to ask
Press and hold the "Refrigerator" and "Freezer" buttons simultaneously for 5 seconds.
Identification division. Program-id. Environment division. Data division. Working-storage section. 77 f pic 9(3). 77 c pic 9(3)v99. 77 p pic z(3).z(2). Procedure division. Main-para. Display " enter fahrenheit temperature ". Accept f. Compute c rounded = ( f - 32 ) * 5 / 9. Move c to p. Display " temperature in degree celsius " p. Stop run.
From a google search - took 3 seconds to find Changing the temperature scale Your Braun ThermoScan is shipped with the Celsius (°C) temperature scale activated. If you wish to switch to Fahrenheit (°F) and/or back from Fahrenheit to Celsius, proceed as follows: (1) Make sure the thermometer is turned off. (2) Press and hold down the «start» button (IRT 4020) or the «I/O» button (IRT 4520). After about 3 seconds the display will show this sequence: «°C» / «SET» / «°F» / «SET» ... (3) Release the «start» button / «I/O» button when the desired temperature scale is shown. There will be a short beep to confirm the new setting, then the thermometer is turned off automatically. Hope this works - says it's for models IRT 4520 and IRT 4020 (Type 6022, 6023)
Box and whisker plot
If you're referring to centigrade, see the attached fahrenheit-centigrade Related Link. You can click on the thermometer display to enlarge it.
Press and hold the recirculation button. Then press the temperature up ("+") button to switch between degrees Celsius & Fahrenheit on the Climate Control Temperature and Instrument Panel Outside Temperature displays.
0 degrees Celsius is equivalent to 273 degrees Kelvin. an increase of 1 degree Celsius is equal to an increase of 1 degree Kelvin. Therefore they will never display the same reading.
to change the celsius on display to Fahrenheit, u want to press the econ button on your climatronic, then right after press your auto button right above the econ button, at this time the display should switch to Fahrenheit or Fahrenheit to celcius whichever u prefer....hopes this helps..
Press and hold the "Refrigerator" and "Freezer" buttons simultaneously for 5 seconds.
Hope this helps. On 1999 model beetle, with key on push and hold in hour and minute buttons at same time this will change your temp from Celsius to Fahrenheit.
The variable, X, has to undergo the following: X*9÷5+32 [The reverse would be to accept a Fahrenheit temperature: (F-32)*5÷9]
The C stands for Celsius, the metric equivalent of Fahrenheit, which is the temperature scale used in the US. In my 2001 Blazer, the compass/temp display is part of the overhead. Next to the display, there are two push-buttons. One turns the display on and off, and the other toggles between Celsius and Fahrenheit. Just hit that button and it should go away. Hope this helps you out. -Rex
If you have a car with automatic climate control, you can change the temperature display from Fahrenheit to Celsius (and back again): pre-2004: Hold down the "Auto" button for a few seconds.2004 onward: Press the AC button (2nd from top left) and the footwell fan button (lower right) together.
By shaking it
The answer depends on what equipment has your multi-function display. I suggest you refer to the user manual.
You can not. you have to change the whole cluster.
Start with the thermometer in off mode. Hold the smiley face down and wait. The thermometer display will scans through multiple functions. The first display will be C*, you want to continue holding the smiley face until the display shows F*and then let go. This will change the setting from Celsius to Fahrenheit.