NO, 10ga has a max of 30 amp, you need 8ga, you should get 8/3wgr, That is 4 wires
2-hot, 1- neutral,1-ground, some appliance's have a ground strap so if the wire only has 3
then you can omit the neutral. But new code is, if installing new wire, must have neutral and ground.
Old style- 2-hot,1- neutral.
New- 2-hot, 1- neutral,1-ground.
You should use 14 AWG wiring on all 15 amp circuits.
Can feed two separate 15 A circuits.
No.
The ampacity or amp rating of all wire is rated by the size of the wire. NM (non-metallic sheathing) wire is no different. In household wiring 14 gauge wire must go on a 15 amp breaker/ 12 gauge goes on a 20 A and 10 gauge goes on a 30 Amp.
There is no rating for #14 wire in the electrical code book. This is because #12 aluminium wire is rated at 20 amps and that is the minimum of home wiring circuit wiring in aluminium. It is not, if at all, used anymore. #10 at 75 or 90 degree C is rated both at 30 amps. #8 at 75 or 90 degree C is rated both at 45 amps.
NO! The use of a higher rated fuse than is recommended can cause the wiring to overheat and cause a fire. Use exactly what is required.
you need an amp and an amp wiring kit
You need no conduit on a residential home using Romex wiring with wooden studs. For a 15 amp circuit use 14/2 wire with a 15 amp breaker. This can only be used in bedrooms, living rooms, and dining areas. All other areas of the home require 12/2 wiring with a 20 amp breaker.
Not if it's functioning properly. The purpose of a circuit breaker is to shut off power if the circuit exceeds the rated power capacity of the wires. Don't plan to exceed the 30 Amp capacity of your house wiring; the results will be destructive.
You should use 14 AWG wiring on all 15 amp circuits.
An amp wiring kit can be purchased any place that sells auto sound systems. Two national retailers that sell these kits are Walmart and Bestbuy. Sonic Electronix is an online retailer who sells amp wiring kits.
Can feed two separate 15 A circuits.
No.
The ampacity or amp rating of all wire is rated by the size of the wire. NM (non-metallic sheathing) wire is no different. In household wiring 14 gauge wire must go on a 15 amp breaker/ 12 gauge goes on a 20 A and 10 gauge goes on a 30 Amp.
There is no rating for #14 wire in the electrical code book. This is because #12 aluminium wire is rated at 20 amps and that is the minimum of home wiring circuit wiring in aluminium. It is not, if at all, used anymore. #10 at 75 or 90 degree C is rated both at 30 amps. #8 at 75 or 90 degree C is rated both at 45 amps.
1200 Watt wiring is more than enough for an 800 Watt amp. The rating of the sub doesn't make any difference to the cables. If you want to use the sub to its rated power you should get a bigger amp. If the amp can only give out 800 Watts and the sub can take 1100 Watts then you can put a bigger amp on. It is still going to be loud as with an 800 Watt amp. I have a 300 watt amp with a 1200 Watt sub and people hear me coming.
Yes, in home wiring as long as it is protected by a 15 amp breaker. Remember this circuit will only handle 1800 watts and cannot be loaded to any more than 1440 watts. So if each light is 75 watts then the maximum you can install is 19.