Less than specified amperage typically won't damage a radio; in fact, it may result in underperformance or failure to operate. Radios are designed to function within a specified voltage and current range, and operating under these conditions usually just means the device won't work effectively. However, consistently operating below these levels can lead to issues like poor sound quality or intermittent operation. It's always best to use the recommended specifications for optimal performance.
That's the description of the interval. It means that "g" is between the numbers specified.
The phrase "at least" indicates a minimum quantity or value, meaning it is greater than or equal to a specified amount. For example, if something is "at least 10," it can be 10 or any number greater than 10. Thus, "at least" is not less than the specified amount.
less than (<) and greater than (>)
Three numbers that are greater than 12,000 but less than 13,000 are 12,345, 12,678, and 12,999. Each of these numbers falls within the specified range.
Yes, the odd numbers that are less than 36 and more than 26 are 27, 29, 31, and 33. These four numbers fall within the specified range.
Less of what needs to be specified for an answer to be given.
no It depends on the application. You can if it is not a significant difference. I.e. Some battery chargers have a fast charge and slow charge settings. The difference is less/more resistance changing to more/less current--same source voltage applied.
-- The ball is manufactured in such a way as to have the specified final weight. -- A ball with more or less than the specified weight would not be eligible to be used in competition, and would be removed from play by the officials.
The duration of More or Less - radio programme - is 1500.0 seconds.
So long as the voltage is the same and the amperage (milliamps in this case) is equal or less it shouldn't harm the device, but if the amperage is less than the standard charger it will take longer to charge. I've read on the web there are devices that will not charge with a different (higher or lower) amperage but I don't understand why.
The fuse in a circuit is designed to protect the wiring first and foremost. If there is a fault in the horn or other parts of the circuit, that causes a short circuit, then it could melt the wire and cause damage to other components or even a fire. The idea would be that the fuse would blow instead. If you take a look at the size of the wiring you will find several websites that will tell you the maximum amperage the wire can take. The actual amperage required to run a diaphragm horn is quite low, less than 5 amps at 12V. If you have air horns the start up amperage of the compressor can be much higher. You might find that there are other ancilleries running off the same supply though, so the fuse amperage needs to be less than the cable can take but high enough for the sum amperage of the ancilleries on the circuit.
All motors draw less current when their load reduces.
FM radio is inherently less sensitive to natural noise ... not immunebut significantly less sensitive ... than AM radio is.
It looks like you are asking if a higher amperage motor can replace a lower amperage motor. It depends on what the amperage difference is. If the amperage is high enough to move the capacity of the wire out of its rated value then it should not be done.Remember motor conductors have to be rated at 125% of the motors nameplate amperage. As the amperage increases so does the HP and the motor's protection will also have to be increased or the motor will trip the lower overload protection settings.Also keep in mind that if the motor is three phase, running a motor with higher HP on a load that does not need the extra HP, it will lower the power factor of the supply distribution.
If the numbers in the specified range are specified from lower to higher, then, to be in the range, your number must be greater than or equal to the first, and it must also be less than or equal to the second.
High amperage with low voltage won't conduct through tissue. High voltage with low amperage will conduct through tissue but will not cause tissue damage. Voltage must be high enough (at least 70-80V) to conduct and interrupt nerve conductivity. Amperage must be high enough to damage tissue. Less than 1/2 milliamp no sensation 1/2 to 2 milliamps Threshold of perception 2 to 10 milliamps muscular contraction 5 to 25 milliamps painful shock (may not be able to let go) Over 25 milliamps Could be violent muscular contraction 50 to 100 milliamps Ventricular fibrillation over 100 paralysis of breathing. Both are dangerous, because you can't have one without the other. amperage = voltage / resistance If you have something with a fixed resistance (for example, your heart) the amount of voltage will be directly related to the amount of amperage. Double the voltage, and you would get double the amperage.
It means, in the absence of other information or requirement, choose something less than (whatever is specified).