What do you mean replace Remington? There is no replacement for Remington,in my eyes Remington is a very good gun.
Contact Remington. Bolts must be fitted to the gun, they are NOT "drop in" parts
The barrel may be able to be fitted however the shotgun would still be limited to 2-3/4" shells. A longer stroke of the bolt is required when shooting the 3" magnum shells which requires a different receiver. Not the best idea.
Best left to a gunsmith
how to change 2000 ford focus quarter glass
NO. But both these barrels are easy to remove and replace and there is a wide selection of factory or aftermarket replacement choices available for both guns.
Adjust or replace
Begin by removing the front quarter panel retaining bolts. The front quarter panel's will come off. Reverse the process to install your new front quarter panels.
twist rubber housing a quarter turn pull out replace with new bulb
it is not possible
Locate the bulb holder under the bonnet, then turn the bulb by about a quarter and pull out. Replace with the same bulb (W5W 12V)
Loosen the screw on the forearm push up on the screw and the barrel will pull out
I am not for sure but I will let you know in about 3 weeks.
Use the same amount
If it can be adapted to fit, it is a little more powerful
If it's power, remove it and replace it with a standard one. power antena = problems.
Drop the tank and replace it.
Turn the wire harness behind the bulb quarter turn left. And pull out, then replace bulb. Put back in and a quarter turn too the right.
If you do not have any problems with plugs, change them when you replace the timing belt (do not forget to replace the spark plug wires too).
From behind the light bezel (under the truck) quarter turn and remove the lamp holder. Replace with an "893" type bulb
They have to bu cut off, and welded back on.
Only if you also replace the rims and you don't have clearance problems around the brakes.
It should not cause you any problems if you replace it. The only forseeable problem would be if you have had your computer modded, on the new computer those settings would not be present..