0
Can you use 3 wire 14 gauge cabling using all 3 wires red black green as hot to run 2 end of run switches to 2 different middle of run lights on the same circuit?
Wiki User
∙ 16y ago
i don't really know.
TheCatWithHat
Add your answer:
Earn +20 pts
The exterior garage lights have always been on All garage switches work but none turn these off How do you find the off switch?
Find out what circuit the lights are on by shutting off breakers until the lights go out. Find the wire that connects to that breaker. If there is no wallboard or insulation in the garage , follow the circuit to the light. If there is a switch then it will have to be somewhere in that circuit and before the light fixture. If your situation is different from this, please use the discussion page and explain.
You have an outlet with three light switches controlling three different lights what is this called?
A triplex outlet. It is a simple device unless one or more of these switches are "3way" switches.
When a home circuit breaker opens the lights in some rooms go off but the lights in some rooms stay on. Explain why.?
The circuit breakers in a panelboard feed separate circuits. The lights that stay on are on a different circuit than the ones that go off. To fine the circuit that feeds the lights that stay on, go to the panelboard and turn off the breakers one by one until the lights go out. This is the circuit that feeds that circuit of lights. Remember that lights and receptacles can be on the same circuit together.
Do lights get dimmer when they are placed in a series circuit or a parallel circuit?
um.. a switch is a part of a series circuit because parallel circuits don't have switches
Are lights onor off in an open circuit?
If the lights are the load of the circuit, then the lights will be off if the circuit is open.
You have two switches on either end of your kitchen and they are on what is called a 3 way circuit Are there dimmers for this circuit Do you need a dimmer?
== == Yes, there are 3-way dimmer switches. Normally staircase lights plus bed room lights need these kind of 3-way switches to turn lights on or off from more than one place. Such lighting arrangements can use dimmers if u need as usual nothing to worry. A dimmer will help save energy, may prolong the life of the bulbs, and will permit greater variability of the amount of light to be used.
Tail lights on my 1990 ford ranger don't work but brake and turning lights do?
burnt fuse ... tail lights are on a different circuit than stop or turn lights
In an closed circuit will the lights be on or off?
Lights are on in closed circuit. It means that is a current flowing when circuit is being closed.
Why do the interior lights go on and off repeatedly after you lock the doors with the keyless remote?
It's possible that one of the switches in a door jamb is no good. The switch 'thinks' the door is open and thus turns on the lights. It happens intermittently because the switch contact may have some contamination that completes the circuit and then it burns off opening the circuit. The repair is to replace all the door switches. Another possibility is the interior dimmer switch on the dashboard.
Where is the switch to turn off interior door lights?
should be with the head lights as an alternate switch or in combination with headlights, move switches in different combinations to see if you can get them to turn off
What the advantages of series circuits?
While many of the terminal parts of a circuit may be a series element, in most circuits there will be both series and parallel components. Neither is superior - they both have their appropriate applications.
Do I need a GFCI for lights in the garage?
no. as long as the lights or switches for those lights are not out in the wheather and cann't get wet.
