It is a neighborhood in which all hubs are straightforwardly associated with a typical focal computer.Every workstation is in a roundabout way joined with each other through the focal PC. In some star systems, the focal PC can likewise work as a workstation.
It is a system topology in which every hub join with precisely two different hubs, shaping a solitary constant pathway for signs through every hub a ring. Information head out from hub to hub, with every hub along the way taking care of each parcel.
The physical layout of the network topology for each network setup makes it different from the others.
1) Star : One Hub conneted to every computer.
2) Bus : One long cable that goes to many computers.
3) Ring : All connected in a ring like network, if one computer crashes they all do.
Computer A is connected to Computer BComputer B is then also connected to Computer CComputer C is then also connected to Computer A
(As a side-note: this, therefore requires each computer to have 2 Ethernet ports.)
Bus:In a bus network, all computers involved are connected to a single "backbone" cable. This is a much simpler setup (schematically, at least).
Depending upon the situation, a bus setup could cost more than a ring, but buses do have the benefit of making it easier to add more computers as needed.
The differentiation can be done in points as follows :
Ring: http://www.teach-ict.com/gcse/hardware/networks/miniweb/ring.htm
Star: http://www.teach-ict.com/gcse/hardware/networks/miniweb/star.htm
ifference between star . bus & ring topology
Network topology can be defined as the way in which different computers are interconnected with the help of some specific media.ORThe physical layout of the computer is known as network topology.there are four types of network topology.1. Star topology2. Bus topology3. Ring topology4. Mesh topology
Without knowing a bit more about the context, probably "topology".Common network topologies are ring, star, bus and mesh.
The arrangement of computers on a network is called topology. It describes how the individual computers are connected to each other and to the network.examples of topology are Star topology, ring topology, mesh topology, bus topology.
A star network.
Star
ring,bus,mesh,star
a topology is a way to connect the network system. we can connect network with different types ring ,bus and mash is a topology or way to show connect network with different types in ring topology the systems which we want to connect in network in the form of ring
In a token bus network architecture, the nodes at either end of the bus do not actually meet. In a token ring, the network logically functions as a ring, but is wired as a star.
Bus star ring mesh hybrid
A hybrid is a combination of two or more basic network topologies, such as a star-bus, star-ring, or tiered topology.
Star, interconnected/extended star, mesh, ring and bush. a lot.
Star network,ring network,tree network,bus network
in star topolgy...
Network Topology decides how Devices on a Network will be interconnected. General used Topologies are BUS, RING & STAR Topologies.
Star is more appropriate, it's little bit expensive than for instance ring but it's easier to maintain and the bandwidth is higher (depending on UTP you are going to use).
The complex combination of pure topologies is called a Hybrid. Examples of hybrid are star ring network and star bus network.
Which type of network would the most efficient out of ring,line,star,bus,tree,and fully connected