No.
1 mm Hg = 133.3224 pascal
350 mm Hg = 46662.84 pascal
1 pascal = 0.0075006 mm Hg
350 pascal = 2.62522 mm Hg
7-15 mm Hg; at 20-25 mm Hg
1 hg = 10 dag so 45 hg = 10*45 = 450 dag.1 hg = 10 dag so 45 hg = 10*45 = 450 dag.1 hg = 10 dag so 45 hg = 10*45 = 450 dag.1 hg = 10 dag so 45 hg = 10*45 = 450 dag.
The term mm Hg means millimeters of mercury; this is a measurement of barometric pressure (the pressure of air is measured in terms of the equivalent height of a column of mercury that would exert the same pressure). 1 mmHg is about 133 pascals.
Altimeter 2992 means that the air pressure is 29.92 in. HG. 29.92 in. HG. With this information, you would calibrate your altimeter to 29.92.
13-8=5 inches
Pressure of 23.8 in Hg to kPa is equivalent to 80596.0582 Pa (pascal)
How do you convert mm Hg to pascal?Answer1 mm Hg = 133.322 Pa760 mm Hg = atmospheric pressure = 101325 Pa133.322 times 760 mm Hg = 101325 Pa
1 atm of pressure equals 760 mm Hg, so 2 atm = 1520 mm Hg.
a barometer is used for measuring pressure,the units for measuring pressure include atm,pascal,torr,mm of hg,bars.
There are several very commonly used units to measure pressure. Probably the most common is atmospheres (atm). The other very common units are millimeters of mercury (mm Hg), which is the same as torr, and then there is kilopascal (kPa).
150 mm Hg
The phrase "760 mm Hg" is physicists' shorthand for "an atmospheric pressure equal to that needed to support a column of mercury [chemical symbol Hg] of length 760 mm". This is approximately average atmospheric pressure at sea level. As the pressure decreases from "760 mm Hg" to "350 mm Hg", the volume of the gas will increase (assuming a constant temperature). The new volume can be determined using Boyle's Law: New Volume = 30 x 760 / 350 = 65.143 Litres
22.3 L
0.1 atm equals 76 mm of Mercury pressure.
420 hg equals how much cg
To measure pressure in the air. Meteorologists use them (weather people) a barometer is used for measuring pressure,the units for measuring pressure include atm,pascal,torr,mm of hg,bars.
The SI unit of the pressure p = F / A (force F divided by area A) is the pascal, equivalent to N/m² (N = newtons). Pascal is the SI unit for pressure and is derived from other SI units using the following relationship: Pa = (kg×m/s²)/m² = kg/m×s² = N/m². Since 1 pascal is a very low pressure being 1/100 of a millibar, it's use is limited to ultra low gas pressure applications such as measuring the pressure differences in ventilation systems. The pascal is more commonly used as larger multiples of the unit which are the hectopascal (hPa), kilopascal (kPa) and the megapascal (MPa) unit, these are more practical when measuring mid range pressures.