answersLogoWhite

0


Best Answer

If your's is a 4X4 you will need to drop the cross member.

User Avatar

Wiki User

18y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Having trouble taking the starter out of your 1991 s10 blazer It seems to be positioned to close to the frame Any Sugestions?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Having trouble starting your Toyota Corolla?

Having trouble starting my 93 corolla it has battery power lights come on but it just makes a clicking sound and when I keep trying the starter kicks over verry slow what part do I have to change


Can you bang on the starter to get it to work?

of course u can and if it blows up that's perfectly normal


Why am i having trouble cranking 95 gmc pu when starter and battery good?

check grounds and check positive cable it may have a lot of resistance


What do I need to check to find out why I am having trouble starting my 94 Olds Achieva starter clicks only once when ignition is turned but won't start and battery checks out ok?

your starter prob has a flat spot try to hit the starter with a hammer then try to restart.


The starter on my rapter turns but it wont start rapter?

what year is your rapter? 01-03 rapters are notorious for having trouble with the (starter oneway clutch) if it freespins and makes nasty growl noises. that's whats wrong with mine to.


Why would an 2004 Expedition with 52000 miles suddenly intermittently have trouble turning over when starting?

Dead battery if it is having trouble turning over or the starter motor is going out. Check the battery cables and ground straps at both ends for corossion


I have a 71 El Camino with a stock 350 motor and am having trouble shimming the starter to the flex plate and was wondering if there is a different combination of starter and flex to line up correctly?

Must be the wrong starter . Chevys do NOT have shims on there starters,small or big blocks. Now ,pontiacs do. Olds or Buick not sure... CHEVY NO...........


How do you replace a starter on a 93 Chevy ck1500?

Get under the vehicle with a flashlight and locate where the starter is positioned...After you find it, locate the two bolts that hold it onto the bottom of the engine...Then loosen the two bolts and once they are loose, use one hand to hold the starter from falling on you (it is heavy) and the other hand to completely remove the bolts...the two bolts are very long and threaded...The next thing you have to do is remove the battery cable from the starter housing and you will need a small wrench to break the little bolt from the starter silonoid...be sure to wear safety glasses and protect your hands from grease using gloves or an old towel..to install your new starter just repeat these steps backwards...It is easy and a great learning experience and if you are having trouble or problems with replacing the starter then just take a break and come back to it when your recomposed


How do you install starter for 1995 jeep grand cheorkee?

Get under the vehicle with a flashlight and locate where the starter is positioned...After you find it, locate the two bolts that hold it onto the bottom of the engine...Then loosen the two bolts and once they are loose, use one hand to hold the broken starter from falling on you (it is heavy) and the other hand to completely remove the bolts...the two bolts are very long and threaded...The next thing you have to do is remove the battery cable from the starter housing and you will need a small wrench to break the little bolt from the starter silonoid...be sure to wear safety glasses and protect your hands from grease using gloves or an old towel..to install your new starter just repeat these steps backwards...It is easy and a great learning experience and if you are having trouble or problems with replacing the starter then just take a break and come back to it when your recomposed


Battery tested fine new starter Why won't my 1993 Suburban turn over?

There are a few things that may cause this. If you are still having trouble you can contact me on my message board. I will do what I can to help.


Having intermiten problems with the starter on a 1990 jettaworks when it wants to?

You need a new starter


Why does Hyundai not start crankshaft sensor?

This question is asked poorly. Are you having trouble starting your Hyundai, or having trouble with your crankshaft sensor? Asking your question correctly will get you the correct answer. If your car isn't starting, I would suggest looking over the cranking system. (Battery, alternator, starter etc)... To find out if your crankshaft sensor is a problem, you could use a computer diagnostic tool.