Depending on what kind of toilet you have it might just need a new rubber flapper seal or if you have a plastic cone flapper then you might have to order a new one in any case before you go to the hardware store right down (if possible) the make of the toilet and the model it should be located inside the tank wall or between the seat and tank of the bowl.
Or go and get a plumber
First put 3 pounds of bakingsoda into it. Then pour 1 and a half liters of vinegar. it actually works! I tried it with my toilet. If it starts bubbling it means its working. 30 seconds after you pour in the vinegar flush the toilet 3 times. Then you will have a nice unclogged toilet
look inside your tank and see that the toilet bowl fill tube is connected and flowing with water when flushed. the fill tube is a 1/4-3/8" tube that is connected to the fill valve to the overflow and it should be spraying water down the overflow when the fill valve is filling.
or
Call a plumber
Your float or other apparatus in the tank is not measuring the amount of water that is coming into the tank properly. It needs to be adjusted.
putt More water in the bowl
A defective flush valve causes the leak in toilets. A flush valve is a flap or ball plunger device that is supposed to act as a stopper in the bottom of the toilet tank. So to fix your toilet and save water, get any professional plumber to repair the valve or complete replacement kit . alliedallcityinc.com
throw it to the ground flush it down the toilet and die!!!!
you flush the toilet
He Invented The First Flush Toilet In 1568.
Well, it depends how many times you don't flush a toilet. If you don't flush it one time, nothing happens. But if you don't flush it for a month or something, and then you finally flush it, it may get clogged with toilet paper.
both
Yes, a toilet does flush counter clockwise in the USA.
Don't Flush any kind of animals. You can only flush toilet tissues.
$1.34 per flush
Drain it into a toilet and flush it
To eliminate urinary and fecal waste to the sewage. A toilet that doesn't flush is basically a bucket.
If the toilet works each time on one flush, they use roughly half the water of a standard toilet. You would then use half as much a month on the toilet. They do not always flush completely on the first flush and the toilet is only a part of the water bill.