It depends on how deep it is. If it is 6 inches deep, you will need 77 yards.
they need to know how long they can be underwater, and how deep they can go with the air in the tank.
It depends on how deep the concrete. 600 sq ft at 6 inch deep is 300 cu ft = 11.1 yards. 12 inch deep is 22,2 yards; 4 inch deep is 5.5 yards
You need 82/3 [cubic] yards for every foot deep that it has to be.
if that is 3 ft deep it would require 96 yards... IF it is 3 inches deep it would require 24 cubic yards
Depending on what part of the country you live in. In the south they are to be 2 foot deep, most generally it is 3' deep and extreme north 4' deep.
Try 30, 7 footers and 4, 20 footers, (or instead of the 20 footers use 8, 10 footers)
To install concrete footers for a gazebo, follow these steps: Determine the location and size of the footers based on the gazebo's dimensions and weight. Dig holes for the footers at least 12 inches deep and wider than the footer size. Place rebar or metal stakes in the holes for reinforcement. Mix concrete according to instructions and pour it into the holes. Level the concrete and let it cure for at least 24-48 hours before continuing with gazebo installation.
Go to the View menu and then to Headers and Footers. Page numbers can be added there.Go to the View menu and then to Headers and Footers. Page numbers can be added there.Go to the View menu and then to Headers and Footers. Page numbers can be added there.Go to the View menu and then to Headers and Footers. Page numbers can be added there.Go to the View menu and then to Headers and Footers. Page numbers can be added there.Go to the View menu and then to Headers and Footers. Page numbers can be added there.Go to the View menu and then to Headers and Footers. Page numbers can be added there.Go to the View menu and then to Headers and Footers. Page numbers can be added there.Go to the View menu and then to Headers and Footers. Page numbers can be added there.Go to the View menu and then to Headers and Footers. Page numbers can be added there.Go to the View menu and then to Headers and Footers. Page numbers can be added there.
The correct answer is Draft View. In this view graphics, headers and footers are not displayed.
The best practices for installing concrete footers for a deck include digging deep holes, using sturdy forms, ensuring proper alignment and leveling, adding reinforcement, pouring concrete evenly, and allowing sufficient curing time before building the deck on top.
If you go to the monolithic dome site you will be able to check the size of footers for the over all size of your dome. Rev.Dick Freeman domeman3@earthlink.net
Headers are at the top and footers are at the bottom of a page. They contain text or images that appear on every slide.
WordPad does not allow headers and footers. Check out this word processor: http://www.jarte.com/ You can define headers and footers in the Page Setup.
Sometimes they are. Headers and footers are used to convey information. If you write a contract or proposal, you probably want page numbers on each page, so you can identify where to find information. Headers and footers are not exclusive to academic writing.
46
The object that creates a professional printout of data that includes headers, footers, and graphics is the