Study guides

Q: How tall would 1 million one dollar bills be?

Write your answer...

Submit

Related questions

17 million one-dollar bills would stack to about 6,091.67 feet high.

One million 1-dollar bills would be about 358.33 feet tall.

A US dollar bill is reportedly .0043 inches thick. Assuming the same for a 100 dollar bill, a stack of 100 dollar bills totalling one million dollars would be 43 inches tall. It takes 10,000 such bills to equal a million dollars. 10,000 X .0043 = 43 inches. Interestingly, using these measurements, a billion dollars would be just over 3583 feet tall, and a trillion dollars would be just over 678.66 miles tall!

500 ft

13 inches

Assuming there was no air between the bills, the total height would be 167,292,274 centimeters tall or 1,039.51 miles high!

195 100-dollar bills would be 0.84 inches tall.

A stack of 1,000,000,000 one-dollar bills would be about 358,333.33 feet tall or 67.87 miles high.

Approximately 358.33 feet tall.

The height of a stack of 1,000,000 one dollar bills measures 4,300 inches or 358 feet - about the height of a 30 to 35 story building.

One million dollars in ten-dollar bills would weigh 220.5 pounds. It would make a continuous stack almost 36 feet tall, or it could be rearranged into a cube with 18-foot sides. You can get more cash dimensions and cash size and weight conversions at http://www.cashdimensions.com/

Approximately 4.3 inches tall.

well, since the average $20 bill is 0.3mm thick, 1,000,000 of them would be 30m tall :D

A dollar bill is .0043 inches thick. It would take 10 million $100 bills to equal $1billion so the answer is 43,000 inches which is equal to 3,583.333 feet. More than half a mile.

According to the U.S. Treasury a dollar bill is .0043 inches thick. Therefore, a stack of 1,000 one dollar bills would be: 4.3 inches thick.

387X43"= 1 stack 16641" tall or---1386.75 feet tall

11mm tall.

You'd better find a tall ladder: the stack would be 3,583.33 feet tall.

2,041 Pounds

Approximately 17.92 feet tall.

i

5/8"

a stack of one million $1 bills.

Theoretically, 67.866 miles. If any bill is not compressed any further than its "normal" thickness of 0.0043 inches (0.11 mm), then one billion bills would make a stack of 4.3 million inches (67.8 miles).

One billion US currency bills would create a stack more than 67.8 miles high. The average thickness of the paper used is 0.0043 inches (about 0.11 mm). One billion bills (if they did not get further compressed by the weight) would reach a height of 4.3 million inches (67.866 miles).