If this happened immediately after replacing the starter, I would say the wires on the solonoid are connected wrong. It could be the switch but I think it is the wiring.
To hookup the solenoid switch on F150 pick-up 5.0 after replacing it, first connect a voltmeter or test light to the solenoid's S terminal. Make sure the starter receives voltage at that terminal when the ignition switch is in the on position.
The negative cable actually is bolted to the engine block, and the positive cable will go to the solenoid that is attached to the radiator support. On newer models, the solenoid would be attached to the starter, and then, of course, the positive cable would connect at the solenoid down below on the starter.
Remove - battery cable Remove + battery cable from battery and starter solenoid Route new cable following original routing Connect to starter solenoid Connect to + battery terminal Connect - battery cable
yes. you just have to know what wires lead to and which ones to connect together
1986 f150 emisson light on is their restn set
On the Starter
There are images available online to help you see where the Fuel reset switch on a 1986 Ford F150 is.
I am having problems with my break lights and want to know what the layout of the fuse box is for a 1986 ford F150.
It is located in the engine compartment on the passengers side firewall. the solenoid is located under the hood
It is underneath the vehicle on the driver's side. It is a rectangular black box, with the solenoid toward the front of the vehicle.
starter is out, motor is locked up or your starter solenoid is out.
Trouble code P0755 means:Shift solenoid B malfunction
what is valve of ford truck F150 1986
The shift solenoid on a 1998 F150 is on the fender well. It is mounted with bolts and requires a socket set to be removed.
yes it does
red first, black last is correct. always connect positive cables first and negative or ground cables last
start with wires
Fuse diagram on 1986 ford F150
The 1986 ford f150 has two fuel pumps. There is one pump mounted inside of each fuel tank.
The cannister on my 2002 F150 is located just inboard of the spare tire. If you lower the spare tire it will be easier to access. The EVAP solenoid is also located on top of the cannister. Have fun and don't work to hard. Richard Petty.
Fusable link? Check at starter solenoid
You have connected the wires wrong. You need to make sure that you connect the wires the way that they came off.Somewhere you got them mixed up and connected wrong.