If you're lucky, then your pool is rectangular and equally deep everywhere. In that case, take a long ruler and measure the length and the width. Stick the ruler in the water until it touches the bottom, and use that to measure the depth. Multiply the three numbers together and you'll get the volume. Unfortunately, you'll get the number in cubic feet or cubic meters, and you probably want it in liters or gallons. How to convert: Cubic meters to liters: multiply by 1000. Cubic meters to gallons: multiply by 264. Cubic feet to liters: multiply by 28. Cubic feet to gallons: multiply by 7.5. If you're not so lucky, your pool is deeper in some places than in others. Hopefully, the bottom is at least flat: if it is, then measure the depth at two opposite corners and average - do everything else as in the other case.
Call your local water company.
It temporarily puts a maximum amount of chlorine in the water of the pool
If you have a "chlorine generator" that requires salt in the water, ALWAYS refer to the manufacturers recommendations for the proper amount.
An average amount of water
Litres.
A pool that is 16'x32'x5' would hold 19,200 gallons of water. You can use a pool volume calculator to help you figure the actual volume of water your pool will hold.
You get a salt water chlorinator installed and add the correct amount of salt to the pool advice is available on this from your local pool shop.
how deep you are in the water.
simply buy the required amount of salt for the pool from a pool shop or other salt supplier and and toss it in the water.
W(15) is the number of gallons of water in the pool after 15 minutes.
Liters measure the volume of something so to measure the amount of water in the pool you'd use liters
liters