10 x 20 x 0.06 = 12 litres.
the density of glass varies.
if we take a density of 2.6 kg/litre then
2.6 x 12 = 31.2 kg
I would have gotten the weight of the glass g/cm3 or something and then get the size of the glass (100/50/0,5cm for instance) and calculated the size of the glass ( in this case 2500 cm3) and claculated the weight out of that (some converting processes and such)
Grams. Definitely.
mutiply 1.7 pounds for every 1/8" of a square foot of glass. For instance a 3/8" panel of glass that is 3' x 6' would be 1.7 x 3 (from 3/8") x 3 x 6 = 91.8 pounds. According to PDGEnvironmental Inc website polished plate glass 1/4" is 3.28 lbs per sq ft and polished plate glass 1/2" is 6.56 lbs per square foot. "Double strength 1/8" glass is 1.6 lbs per sq ft.
A Newton..
Glass weighs 162 pounds per cubic foot. Tempering adds no weight. Glass is glass, except specialty glasses like high temperature glass, which weighs slightly more.
I would have gotten the weight of the glass g/cm3 or something and then get the size of the glass (100/50/0,5cm for instance) and calculated the size of the glass ( in this case 2500 cm3) and claculated the weight out of that (some converting processes and such)
You calculate the volume then multiply by the density of the glass. The volume is 1 x 1 x .006 = .006 cu meters Density depends on glass type but is generally about 2200 kg/cu meter Weight = .006 x 2200 = 13.2 Kg
If you are in the US, then glass weighs 155lbs/ft³. If you are not in the US or you want to use metric, you will have to do a conversion. 155lbs/ft³equals approximately 1.52lbs/ft² at 1/8" thickness Polyvinyl Butyral or PVB weighs .085lbs/ft² at .015" thickness. Since laminated glass is two sheets of glass "sandwiching" a sheet pf PVB, we can calculate the weight of a square foot of laminated glass consisting of two lites of 1/8" glass plus the weight of the PVB interlayer - in this case, .015". glass + interlayer + glass = 1.52lbs + .085lbs + 1.52lbs = 3.125lbs/ft² A little bit of basic arithmetic and you can get the weight of any size or thickness desired.
Depends on how big the glass is as far as height and thickness is concerned.
The weight for one cubic inch of Delrin is .049 lb. The glass reinforced Delrin weights more depending upon the percentage of glass. 10% glass = .055 20% glass = .056 30% glass = .058
Yes
To make a glass paper weight you need to have a job to do it because it is extreamley dangers and takes years of parctise to so no you cannot make a glass paper weight sorry T-T
It is relative to the amount of water and the weight of the glass. Obviously, an eight ounce glass of water would weigh 8 ounces plus the weight of the glass. <><><> The weight of a glass of water depends on the amount of water in the glass. A common size of water glass holds 8 fluid ounces of water. In rough terms, one ounce of water weighs one ounce (weight). This gives the answer that a glass of water weighs half a pound. (The weight of the glass is not included in this half a pound.) To be more precise, an Imperial Ounce (used in Britain) is 28.41 millilitres. This would give 8 ounces a mass of 227.3 grams. (0.500 pounds weight) In the United States, a Fluid Ounce is 29.57 millilitres, which gives a mass of 236.6 grams. (0.52 pounds weight).
8mm glass is 20KG per sq metre 10mm glass is 25kg per sq metre
It depends on how big the glass is.
Volcanic Glass Is Worth 6 Dollars US Per Ounce. So Just Weigh And Calculate.
To calculate the sag of a glass shelf, you can use the formula for deflection in a beam: sag = (w * L^3) / (48 * E * I), where w is the uniform load on the shelf, L is the length of the shelf between supports, E is the Young's modulus of the glass, and I is the moment of inertia of the glass shelf. Alternatively, you can use online calculators specifically designed for calculating deflection of glass shelves.