Divide the volume by the hieght. The result is the area of the circle forming the cylinder. Divide the area of the circle by PI. Multiply by 4 and then take the square-root. This will be the diameter of cylinder.
The volume of a cylinder that has a diameter of 20 mm and a height of 15 mm is 4,712.39 mm3
To calculate the volume of a cylinder, first determine the height or length of the cylinder as well as the diameter. Divide the diameter by two to get the radius, then use this formula:Volume = radius2 x Pi x length (or height)
The simple answer is - you can't ! You need the addition of either the diameter or radius in order to calculate the volume.
You cannot find the height and diameter of a cylinder by knowing the volume only. There are infinite combinations of height and diameter that will result in the same volume. You need to know either the diameter or the height in addition to the volume to calculate the remaining unknown. Volume = pi/4 * d2 * h (note: pi/4 * d2 is the same as pi * r2)
If you only know the length, and nothing else, you can't. If you know the length and the volume, you can calculate the diameter.
In order to Calculate the weight of a hollow cylinder, you need to find out the density of the material of the cylinder first. once you have that, you can use the formulas below Find out volume of material as follows: Volume = Pi * (Outer Diameter of Cylinder)2/4 - Pi * (Inner Diameter of Cylinder)2/4 Mass = Density * Volume( from above equation) Note: Remember that units of Density and volume should be matching.
The volume of a cylinder that has a diameter of 20 mm and a height of 15 mm is 4,712.39 mm3
To calculate the volume of a cylinder, first determine the height or length of the cylinder as well as the diameter. Divide the diameter by two to get the radius, then use this formula:Volume = radius2 x Pi x length (or height)
You can use the formula for the volume of a cylinder to calculate that.
The simple answer is - you can't ! You need the addition of either the diameter or radius in order to calculate the volume.
You cannot find the height and diameter of a cylinder by knowing the volume only. There are infinite combinations of height and diameter that will result in the same volume. You need to know either the diameter or the height in addition to the volume to calculate the remaining unknown. Volume = pi/4 * d2 * h (note: pi/4 * d2 is the same as pi * r2)
If you only know the length, and nothing else, you can't. If you know the length and the volume, you can calculate the diameter.
The diameter, alone, is not enough to find the volume of a cylinder. You need the height as well. > Where pi = 3.1416, and d = cylinder diameter cylinder volume = pi * (d/2)2 * length of cylinder
The volume of a cylinder that is 30mm in diameter and 700mm high is 494,800.84mm3
If you have the radius and the height in feet, you can calculate the volume as:V = pi x radius squared x height (If you have the diameter of the cylinder, the radius is one-half the diameter.)
To answer this question the following assumptions have been made:ms = mild steelOD = outer diameterDensity of mild steel = 7.85 gcm-3The easiest method of calculating the volume of a material forming a hollow cylinder is to:Calculate the volume of the cylinder as if it were solid using the outer diameterFind the inner (hollow) volume by subtracting 2 x the material thickness from the outer diameter and calculating the volume of the inner (hollow) cylinder.The inner volume of the cylinder can then be subtracted from the outer to give the volume of solid material.From this the mass can be calculated.Volume of cylinder:Diameter = 65 cm Radius = 32.5 cmArea = pi(r)2 = 3,318.31 cm2Volume = Area x Height= 3,318.31 x 120= 398,197.2 cm3Volume of inner (hollow) cylinder:Diameter = 62.6 cm Radius = 31.3 cmArea = pi(r)2 = 3,077.79 cm2Volume = 3,077.79 x 120= 369,334.8 cm3Volume of steel forming pipe:Volume of steel = Total volume - Inner volume = 398,197.2 - 369,334.8= 28,862.4 cm3Mass of steel forming pipe:Mass = Density x Volume = 7.85 x 28,862.4= 226,569.84 gMass of pipe = 226.57 kg
Volume = Height * Area of Circle Area of Circle = pi*(Diameter/2)^2 Height = Diameter Volume = Diameter*(pi*(Diameter/2)^2) Volume = (pi/4)*Diameter^3 Diameter = (4/pi) * Volume ^ (1/3) Diameter = (4/3.14)*220^(1/3) ≈ 6.54 cm