0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the front-end digit of 5.28?
The front-end digit of 5.28 is 5.
What is front end rounding of 75?
Front end rounding is taking the first digit and making the rest 0. 75 would be 70 in front end rounding.
Divide 60pounds in the ratio 1 2?
If you are dividing something into the ratio of 1:2, you would be dividing it into three parts. In this instance, your end ratio would be 20:40 pounds.
What is the front-end estimation for 2356?
2,000. A front-end estimation just means to round it by the greatest value, in this case the thousands.
When did Valencian Marxist Front end?
Valencian Marxist Front ended in 1962.
Where is the bell housing on 1999 dodge ram truck 5.2L?
The bell housing is the front of the transmission, the end that bolts to the engine.The bell housing is the front of the transmission, the end that bolts to the engine.
Can you change rear end only on your jeep?
Yes, (in 4x4 applications the gear ratio/s match the front axle). 2 wd there is no front ratio to match.
Where is the rear differential fill plug for Chevy silverodo?
Look at the front part of the rear end where the driveshaft bolts to it and you will find it in the housing. It will be on the passenger side of the rear end housing where the driveshaft hooks to the rear end.
What rear end gear ratio is interchangeable with a 2002 dodge ram 1500 FWD with a gear ratio of 355?
If the front is 3.55, then the rear needs to be 3.55
Will the rear end housing out of a 1974 Chevy 2 wd trk fit a 1978 Chevy trk 4 wd?
YES. But you better make sure the gear ratio in the 74 matches the 78. 4-wheel drives must have the same gear ratio in the front and rear are things will BRAKE UNLESS IT IS IN MUD AT ALL TIMES.
How do you replace the speedometer cable on a 1994 Harley Davidson Sporster 1200?
First: you unscrew the cable housing assembly from the back of the speedomiter housing. Second: you pull the speedomiter cable from the housing. If the cable is broken inside the housing you must unscrew the housing from the spedomiter adaptor on the front axle,. at this point you should be able to pull the broken end from the adaptor with a pair of pliersif you can't pull it at this point you will have to pull the front axle and take the adaptor out and try to remove the broken end.
How do you tell rear end ratio on 1978 Chevy truck?
To know for sure, You need to remove the big metal plate on the rear end housing and count the # of teeth on the BIG round gear / Ring gear. Then count the teeth on the small round gear / pinion gear that sets deep in the housing and runs on the big gear. Then divide the small # into the high # and that will be you gear ratio.
How can you tell the rear end gear ratio?
Simply by jacking both rear wheels off the ground,put it in neutral,handbrake off, and chock the front wheels, and then turn the rear wheel 10 revolutions, and count the number of revolutions the tailshaft makes. For example, if it makes almost 38 revolutions, the diff ratio is 3.78:1. Alternatively, If the diff is out and you can't find a ratio stamped on it,count the teeth on the crownwheel and pinion gears, and calculate the ratio from this.
Where are axles on a car?
If it is a front wheel drive car then the axels are in the front. Just look behind the front wheels and you will see them. If it is a rear wheel drive, then thay are in the back inclosed in the rear end housing.
Where is the thermostat in a 1991 ford explore?
Follow the top radiator hose from the radiator , it connects to a metal pipe ( which is part of the thermostat housing ) the thermostat housing at the other end of the metal pipe is bolted to the front of the engine . The thermostat is inside the thermostat housing
What is the gear ratio in a 1997 dodge ram 1500 4x4 rear end Front says 3.54. can you run a 3.55 rear or does it need to be a 3.54?
They are so close that it doesn't matter. Most places will call the front ratio in that dana 44 a 3.55 also
Where is the thermostat located on a 95 Isuzu Rodeo?
Usually in the housing at the engine end of the upper radiator hose right in the front of the engine just follow the large radiator hose to the front of the engine
