Unfortunately, the question does not state whether the diameter is 8 metres or 8 micrometres or some measure in between the two.
H = D sin ( ((2*pi*V.k)/V.t) - pi/2) + D Here: D = Diameter of the cylinder V.k = The known volume of the liquid V.t = The total volume of the cylinder H = The height of the liquid.
Measure the outer diameter of the tube and its' length. Calculate each tube volume and multiply by number of tubes. For those who want to calculate the inside liquid capacity of the shell side, it is advise to include the baffle volume with the tube bundle volume.
First, calculate the radius. It is half the diameter. Then, to calculate the volume, use the formula: Volume = 4/3 x pi x radius3. Pi is approximately 3.1416.
The equatorial diameter is approximately 49,528 kilometers. The volume is 6.254 X 10 to the 13th squared, or about 57.74 Earths.
Pi x diameter x height.
Height and diameter will give you the volume, if you know the density you can then calculate weight from that.
Volume = Height * Area of Circle Area of Circle = pi*(Diameter/2)^2 Height = Diameter Volume = Diameter*(pi*(Diameter/2)^2) Volume = (pi/4)*Diameter^3 Diameter = (4/pi) * Volume ^ (1/3) Diameter = (4/3.14)*220^(1/3) ≈ 6.54 cm
The diameter of the moon is about 3474.8 kilometers. The volume of a sphere is equal to 4/3 (pi)(radius cubed). This gives it a volume of approximately 2.1958 E10 cubic kilometers.
The mass of Mercury is 3.3022 E23 kilograms, and its volume is 6.083 E10 cubic kilometers. It's average diameter is 4879 kilometers.
Volume would be 5.118 gallons of liquid.
Derive from measurements of length, breadth, height, radius, diameter etc. Measure the volume of displaced liquid when the object is submerged. If the object is of a material of known density (or specific gravity), weigh it and calculate volume from volume = mass/density.
You can dip the irregular solid in a water or other suitable liquid. This is how, you can measure the volume of the solid. The mass can be measured by weighing scale. Mass/volume = density. It is easy to measure the mass and volume of the liquid. First measure the mass the container. Then add the liquid to it. You will get the mass of the liquid. Then measure the volume of the liquid. Use the above formula to calculate the density of the liquid.