A ball is a spherical shape and the formula for finding the volume of a sphere is: Volume = 4/3 x pi x radius3 Diameter of the ball = 9 and 9/16 inches so the radius will be half of this which is 4.78125 inches. Volume = 4/3 x pi x 4.781253 = 457.8391924 cubic inches. Therefore the volume of air in the ball is 458 cubic inches correct to three significant figures.
Pi x diameter x height.
Volume = Height * Area of Circle Area of Circle = pi*(Diameter/2)^2 Height = Diameter Volume = Diameter*(pi*(Diameter/2)^2) Volume = (pi/4)*Diameter^3 Diameter = (4/pi) * Volume ^ (1/3) Diameter = (4/3.14)*220^(1/3) ≈ 6.54 cm
You wll also need to know its radius as well as its volume
The volume of a cylinder that has a diameter of 20 mm and a height of 15 mm is 4,712.39 mm3
To calculate the volume of a cylinder, first determine the height or length of the cylinder as well as the diameter. Divide the diameter by two to get the radius, then use this formula:Volume = radius2 x Pi x length (or height)
First, calculate the radius. It is half the diameter. Then, to calculate the volume, use the formula: Volume = 4/3 x pi x radius3. Pi is approximately 3.1416.
Height and diameter will give you the volume, if you know the density you can then calculate weight from that.
Pi x diameter x height.
Volume = Height * Area of Circle Area of Circle = pi*(Diameter/2)^2 Height = Diameter Volume = Diameter*(pi*(Diameter/2)^2) Volume = (pi/4)*Diameter^3 Diameter = (4/pi) * Volume ^ (1/3) Diameter = (4/3.14)*220^(1/3) ≈ 6.54 cm
You wll also need to know its radius as well as its volume
The volume of a cylinder that has a diameter of 20 mm and a height of 15 mm is 4,712.39 mm3
To calculate the volume of a cylinder, first determine the height or length of the cylinder as well as the diameter. Divide the diameter by two to get the radius, then use this formula:Volume = radius2 x Pi x length (or height)
Diameter = 4.3 therefore the radius is 2.15 Volume of a sphere = 4/3*pi*radius3 Volume = 4/3*pi*2.153 = 41.62976785 cubic units.
calculate the volume of water a drum can take the drum is 72inch diameter by60inch height
The simple answer is - you can't ! You need the addition of either the diameter or radius in order to calculate the volume.
You cannot find the height and diameter of a cylinder by knowing the volume only. There are infinite combinations of height and diameter that will result in the same volume. You need to know either the diameter or the height in addition to the volume to calculate the remaining unknown. Volume = pi/4 * d2 * h (note: pi/4 * d2 is the same as pi * r2)
Look up information about each star's mass and diameter, calculate the volume, and calculate mass / volume. Or simply assume that the star with the smallest diameter has the largest density. This is usually the case, since the stars' mass varies way less than their volume.