For a pendulum, or a child on a swing: Change the length of the pendulum or the swing-chains. For a guitar string: Change the tension (tune it), or the length (squeeze it into a fret). For an electronic oscillator: Change the piezo crystal, or change a capacitor or inductor for one of a different value.
The ration of a frequency to its total frequency is called relative frequency.
frequency meter is used to measure the frequency of unknown frequency signal.
The frequency in a frequency table is the number of occurrences within each class width. The total frequency is the sum of all frequency's within all the classes.
Period = 1 / frequency
Given a frequency table,the first cumulative frequency is the same as the first frequency;the second cumulative frequency is the sum of the first cumulative frequency and the second [ordinary] frequency;the third cumulative frequency is the sum of the second cumulative frequency and the third [ordinary] frequency;and so on.An alternative definition is that the cumulative frequency for any value is the sum of all the frequencies less than or equal to that value.
Frequency controls the color of the light.
There is no best frequency. If you train a dog correctly any frequency the dog can hear will control it. Your voice, whistle, 'silent' whistle. All are acceptable.
In industrial, there is a device called variable frequency drive (allso frequency inverter, ac drive) to control the motor speed by adjusting output frequency.
Volume Control Light Control Speed/Frequency Control Temperature Control
what do you mean by terms under damped, critical damped and over damped frequency of control system?
Power sharing between two areas occurs through these tie-lines. Load frequency control, as the name signifies, regulates the power flow between different areas while holding the frequency constant.
it is range of frequency variation for which governor does not take any proportional corrective action.
The VCO is a special type of oscillator that has a frequency controlled by an applied voltage.The frequency of the VCO without any control signal applied is called the free running frequency.
Design of filtering and control systems is usually easier in the frequency domain than in the time domain.
Frequency drives are an adjustable-speed drive used for electro-mechanical drive systems. They control the motor speed and torque by varying motor input frequency and voltage.
motor can be control by using variable frequency drive
Use a variable Frequency Drive. Sold by ABB, Allen-Bradley, and many others.