Siemens is the reciprocal of ohm. You can convert from milliohms to ohms, then take the reciprocal. The answer will be in Siemens.
123/999
Note: You cannot convert cubic to squared - you convert cubic metric to cubic imperial. 1 inch = 2.54 centimetres, so 1 cubic inch = 2.54 x 2.54 x 2.54 = 16.387064 cubic centimeters. Therefore to convert a number of cubic centimetres into cubic inches you divide it by 16.387064 For example 123 cubic centimetres = 123 ÷ 16.387064 = 7.5 cubic inches, rounded to one decimal place.
There is not an exact number of days in a month and therefore weeks in a month. So the best way is to convert to years (52 weeks in year) and then multiply by 12 (months in a year)(123/52)*12 = 28.38461538461538 months.
Set the cubic root of 123, and we have: ∛123 = ∛(3 * 41) 123 doesn't have the perfect cubic factor, so we express the result as ∛123. If you multiply ∛123 by itself twice, then we have... ∛123 * ∛123 * ∛123 = 123!
2 km to 123 m = 2000 m to 123 m = 2000 to 1232 km to 123 m = 2000 m to 123 m = 2000 to 1232 km to 123 m = 2000 m to 123 m = 2000 to 1232 km to 123 m = 2000 m to 123 m = 2000 to 123
To convert from picosiemes to microsiemens, you have to divide by a million. To convert from "per meter" to "per centimeter", you would multiply by a million. The end result is that you divide by 10,000.
To convert ohms to: microohms - multiply by a million milliohms - multiply by 1000 kilohms - divide by 1000 megohms - divide by a million
mho/cm = S/cm = 10^3 mS/cm
To convert mm to cm: Divide the given length in mm by 10. Example: Convert 123 mm to cm: = 123 mm * 1cm/10 mm = 123 cm/10 = 12.3 cm To convert cm to m: Divide the given length in cm by 100. Example: Convert 123 cm to m: = 123 cm * 1m/100 cm = 123 m/100 = 1.23 m To convert mm to m: Divide the given length in mm by 1000. Example: Convert 123 mm to m: = 123 mm * 1cm/10 mm * 1m/100 cm = 123 m/1000 = 0.123 m
Divide by 30.48 to convert cm to feet 123 cm =123/30.48 feet
123
You cannot since there is no equivalence. MicroSiemens is a unit of measurement of electrical conductance while PPM refers to parts per million and is a pure number (ratio). The two measure different things and, according to basic principles of dimensional analysis, any attempt at conversion from one to the other is fundamentally flawed.
A siemens is a unit of conductance or admittance, expressed as the reciprocal of resistance or impedance. (Siemens = 1/ohms) One microsiemens is 1 megohm.
Divide by 100000.
0.00058 milliohms
123/999
Up until about the late 1970's the units of EC were micromhos per centimeter (µmhos/cm) after which they were changed to microSiemens/cm1 µS/cm = 1 µmho/cm.CorrectionThis is true, but the answer and the question illustrate why the "mho" was changed to the "siemens": it's too easy to confuse "mho" and "ohm" Incidentally, the mho was intended to be the ohm spelled backwards, to illustrate that the mho is the inverse of the ohm, but as we see, this turned out to be more confusing than helpful. The original question is how to convert µS cm to ohm cm. I assume that the original poster wanted to convert ohm cm to µS/cm (microSiemens divided by centimeters, not multiplied)In that case, the answer is that S/cm are the inverse of Ohm cm. So:1/ 1 megaohm cm = 1 microS/cm