There is no way. Gauges are measurements left over from history when there were few accurate means of measuring. For example: Shotgun gauges: The number of round lead balls needed to make a pound. So a 1 gauge shotgun had a diameter just large enough to fire a 1 pound lead ball. A 12 gauge shotgun had a diameter just large enough so that 12 lead balls of its ammunition balls would equal a pound, and the biggest ball it could fire was 1/12 pound. Nutty huh? There are lots of sheetmetal and tube and wire gauges based on "how many sheets of some particular area would add up to some weight" or "how long a wire or tube would be some weight", etc. The ISO (metric) system tosses all these into the dustbin of history where they belong.
1 centimeter = 10 millimeters.
Centimeters can be converted to millimeters by multiplying the number by 10 (or move the decimal point to the right one place).
---
There are 10 mm in a centimeter
To convert from centimeters (cm) to millimeters (mm) simply multiply by 10.
mili means a thousanth of, there are 1000 milimeters in a meter, just like theres 1000 mililitres in a litre.
so 10 meters = 1000 x 10 = 10,000mm
0.4 of a meter = 1000 x 0.4 = 400mm
etc...
if the measurement is in inches then multiply that number (if it's in feet convert to inches) by 25.4 and then it'll be in millimeters.
There are 1000 millimetres in one metre. Therefore, to convert metres to millimetres, multiply by 1000. For example, 5.7 metres is equal to 5.7 x 1000 = 5700 millimetres.
well if 1000 gauge = 0.254 millimeter all you have to do is complet the math. it is going to be tricky but it can be done
meter/1000=millimeter
If you have three measurements of length (meters, centimeters, millimeters) and you multiply them together, you will end up with a measure of volume (liters). Of course, if you were to actually do this, you would want to convert all of the lengths into a common unit (convert centimeters and millimeters to meters or convert meters and centimeters to millimeters).
To convert millimeters to inches, you divide by 25.4 (an inch has exactly 25.4 millimeters).
liters does not convert to millimeters
To convert millimeters into inches, divide millimeters by 25.4. To convert inches into millimeters, multiply inches by 25.4.
MM is an abbreviation for millimeters. There are many units of measure that you can convert to millimeters. However, with out knowing what the unit of measurement 40 is in, you can not convert it to millimeters.
If you have three measurements of length (meters, centimeters, millimeters) and you multiply them together, you will end up with a measure of volume (liters). Of course, if you were to actually do this, you would want to convert all of the lengths into a common unit (convert centimeters and millimeters to meters or convert meters and centimeters to millimeters).
You are mixing measurements. An ounce is a unit of mass or weight. A millimeters is a unit of length. You can't convert between them.
One inch is equivalent to 0.039370 millimetres. In order to convert the measurements one should divide the amount of millimetres by 0.039370 to find the length in inches.
convert 100 millimeters to meters
To convert millimeters to inches, you divide by 25.4 (an inch has exactly 25.4 millimeters).
In such problems, you should convert everything to the same unit - in this case, to millimeters or to meters. Then it should be easy to compare the two measurements.
First, convert inches to centimeters. One inch is equivalent to 2.5 centimeters. Then, convert to millimeters- one centimeter is ten millimeters.
406.4 millimeters
600 millimeters in metric measurements is the equivalent of 23.622 inches in US customary measurements. One inch is the equivalent of 25.4 millimeters.
liters does not convert to millimeters
Divide millimeters by 10: 40 millimeters is 4centimeters.
To convert millimeters into inches, divide millimeters by 25.4. To convert inches into millimeters, multiply inches by 25.4.