To convert cubic meters to metric tonnes of fuel oil, divide the volume in cubic meters by the density of the fuel oil in tonnes/m³ (or in kg/l).
The density will depends upon the temperature of the fuel oil.
500
266
The specific gravity for aircraft fuel is approximately 0.8 (depending on grade and anti freeze additives). Therefore 1250 litres would weigh a metric tonne (1000kg).
115502.6 cubic inches
It depends on which LPFO you are talking about. This is because the density of the product determines its weight. For Nigerian LPFO, available from Nigerian Oil Services, the specific gravity of this D6, low pour fuel oil is about .9189 - .8397. That means it is lighter than water so it takes more of it to make a metric tonne. There 1000 liters of water in a metric tonne so you would divide 1000 by .85 (average) and you get about 1176 liters in a metric tonne for Nigerian LPFO. You can use this same formula if you have the specific gravity of the fuel you are trying to buy. I am assuming by the word tonne you meant metric ton because that is how it is sold, by the MT.
To convert the density of fuel from kilograms to metric tonnes, divide the density value in kilograms by 1000. This is because there are 1000 kilograms in a metric tonne. For example, if the density of the fuel is 800 kilograms per cubic meter, the density in metric tonnes would be 0.8 metric tonnes per cubic meter.
BTU per hour is a measure of power. Cubic meters is a measure of volume. Perhaps you mean cubic meters of propane, alcohol or some other fuel.
9,000
There are 1000 kilograms (kg) in a metric ton (or tonne). And there are about 0.264 gallons in a litre. Also, the density of diesel fuel is right at about 0.85 kilograms per litre. Since you have a metric ton of diesel fuel, that is 1000 kilograms of diesel fuel, you need to know how many litres of diesel fuel you have. Divide 1000 kg by 0.85 kg/litre and you'll get about 1176.5 litres. Now convert that to gallons by multiplying 1176.5 litres by 0.264 gallons/litre and you'll get about 310.6 gallons of diesel fuel in that metric ton you started with.
Using metric measurements you would most commonly purchase car fuel or milk in "Litres" (or "Liters" American spelling).However, the base unit of volume is the cubic metre:-Where there are:-1000 cubic metres in a cubic kilometer1000 litres in a cubic metre.100 centileters in a litre.1000 millilitres in a litre.10 mililitres in a centilitreand:-- milliliter = ml-- cubic centimeter =cc-- liter =l
1,183 litres of jet fuel in a metric tonne
1 cubic meter is 1000 Liters 100 cm = 1 meter, 1m x 1m x 1m = 1 cubic meter 100cm x 100cm x 100cm=1,000,000cubic cm = 1 cubic meter 1 cubic cm = 1 ml, 1000ml = 1 Liter (1,000,000 cubic cm) x (ml/cubic cm) x (Liter/1000 ml) = 1000 Liters.
you would convert it buy using specific gravity. the specific gravity of fuel oil is 0.893 at 60F. so that said 1 liter of furnace oil would weigh 893g. one metric tonne of furnace oil would equal roughly 1120 liters
Nine cubic meters of air is required to burn 1 liter of fuel in a diesel engine. A person does not put liters of air into a diesel engine. Liters of fuel are put into a diesel engine.
There are approximately 298 gallons of jet fuel per metric ton. Jet fuel weighs about 6.7 pounds per gallon. The mass of fuel varies depending on the pressure and temperature.
Breeder reactors are used to convert fertile fuel into fissile fuel.
That would be cubic centimeter, in volume, of fuel.