mho/cm = S/cm = 10^3 mS/cm
Up until about the late 1970's the units of EC were micromhos per centimeter (µmhos/cm) after which they were changed to microSiemens/cm1 µS/cm = 1 µmho/cm.CorrectionThis is true, but the answer and the question illustrate why the "mho" was changed to the "siemens": it's too easy to confuse "mho" and "ohm" Incidentally, the mho was intended to be the ohm spelled backwards, to illustrate that the mho is the inverse of the ohm, but as we see, this turned out to be more confusing than helpful. The original question is how to convert µS cm to ohm cm. I assume that the original poster wanted to convert ohm cm to µS/cm (microSiemens divided by centimeters, not multiplied)In that case, the answer is that S/cm are the inverse of Ohm cm. So:1/ 1 megaohm cm = 1 microS/cm
Feet x 30.48 = centimeters (30.48cm per foot).
You cannot since there is no equivalence. MicroSiemens is a unit of measurement of electrical conductance while PPM refers to parts per million and is a pure number (ratio). The two measure different things and, according to basic principles of dimensional analysis, any attempt at conversion from one to the other is fundamentally flawed.
Multiply x .12 to get cm2 or by 1.2 to get the m2
The answer is 42.52 inches. One centimeter is equal to .3937007878 inches, usually rounded to .394. To convert centimeters into inches, multiple the centimeters by .393700787, or divide by 2.45
To convert from picosiemes to microsiemens, you have to divide by a million. To convert from "per meter" to "per centimeter", you would multiply by a million. The end result is that you divide by 10,000.
Up until about the late 1970's the units of EC were micromhos per centimeter (µmhos/cm) after which they were changed to microSiemens/cm1 µS/cm = 1 µmho/cm.CorrectionThis is true, but the answer and the question illustrate why the "mho" was changed to the "siemens": it's too easy to confuse "mho" and "ohm" Incidentally, the mho was intended to be the ohm spelled backwards, to illustrate that the mho is the inverse of the ohm, but as we see, this turned out to be more confusing than helpful. The original question is how to convert µS cm to ohm cm. I assume that the original poster wanted to convert ohm cm to µS/cm (microSiemens divided by centimeters, not multiplied)In that case, the answer is that S/cm are the inverse of Ohm cm. So:1/ 1 megaohm cm = 1 microS/cm
Centimeters per second x 0.6 = meters per minute
150--600 microsiemens per meter
1,995 centimeters per second = 44.63 mph To convert from cm per second to miles per hour, divide cm per second by 44.7.
Feet x 30.48 = centimeters (30.48cm per foot).
Divide by 1000
You cannot since there is no equivalence. MicroSiemens is a unit of measurement of electrical conductance while PPM refers to parts per million and is a pure number (ratio). The two measure different things and, according to basic principles of dimensional analysis, any attempt at conversion from one to the other is fundamentally flawed.
There are 100 centimeters per meter. Therefore, 33 centimeters is 0.33 meters.
You need only to convert 1 yard to meters or centimeters. 1 yard is 0.9144 meters or 91.44 centimeters. Your conversion is 0.9144 meters per hour or 91.44 centimeters per hour.
3.5 ceetimeter is equal to what?
Divide by 2.54 and multiply the quotient by 60.