There is no point in doing this. This would be even sillier than measuring the distance from New York to Los Angeles by the thickness of a piece of paper.
Use the right tool for the job.
You would convert rainfall into inches and then into gallons per minute by using a series of calculations. You first ned to determine how much rain is falling in inches by collecting it in a container.
Standard cubic feet per minute in regards to water can be converted to inches. What you will do is first calculate the cubic feet. Next, convert the cubic feet into cubic inches by using the standard measurement of 1 cubic foot being 1,728 cubic inches.
There is nothing to convert. You are using the same unit of measurement. A hertz is a hertz, all you are dealing with is 10 less Hertz. 60 Hertz - 10 Hertz = 50 Hertz The difference is 10 Hertz. The math there is just to give you a clear example and illustrate my point. What you are asking for is similar to someone asking "how do you convert miles to miles" or "how do I convert inches to inches".
Mean = 163.4/2.54 = 64.33 inches approx, and sd = 6.7/2.54 = 2.64 inches, approx.
You can convert centimeters into inches by using a conversion program you will find by googling. However if you do not have a computer handy you may do it by multiplying by using the knowledge that one centimeter equals .39 inches. Thus each inch equals 2.54 centimeters. Simply multiply the number of inches by 2.54 to do this conversion.
The only other way is to have a machine do the long division for you.
Divide the numerator by the denominator, using long division if necessary.
You can convert 9mm to 0.354331 inches using a mm to inches converter.
Convert inches into centimeters can be done by calculating 1 inch equals 2.54 centimeters. Also you can find a calculator on the internet and using that for your answer.
You would convert rainfall into inches and then into gallons per minute by using a series of calculations. You first ned to determine how much rain is falling in inches by collecting it in a container.
To convert a fraction to a decimal, you divide the numerator by the denominator - on a calculator, or using long division.
Standard cubic feet per minute in regards to water can be converted to inches. What you will do is first calculate the cubic feet. Next, convert the cubic feet into cubic inches by using the standard measurement of 1 cubic foot being 1,728 cubic inches.
Multiply the numerator of the fraction by 100 and then divide (using long division if needed or a calculator) by the denominator.
You divide the numerator of the fraction by its denominator - using long division (aka the bus-stop method) if required.
The easiest way would be to measure it in inches, assuming it's not to tall, if you know the height already then you need to convert it to inches. Example, 1 foot = 12 inches, 6 feet = 72 inches.
There is nothing to convert. You are using the same unit of measurement. A hertz is a hertz, all you are dealing with is 10 less Hertz. 60 Hertz - 10 Hertz = 50 Hertz The difference is 10 Hertz. The math there is just to give you a clear example and illustrate my point. What you are asking for is similar to someone asking "how do you convert miles to miles" or "how do I convert inches to inches".
66