You would convert rainfall into inches and then into gallons per minute by using a series of calculations. You first ned to determine how much rain is falling in inches by collecting it in a container.
3 inches
Standard cubic feet per minute in regards to water can be converted to inches. What you will do is first calculate the cubic feet. Next, convert the cubic feet into cubic inches by using the standard measurement of 1 cubic foot being 1,728 cubic inches.
GPM only represents the volume of water, and you cannot deduce pressure from that alone. You would need to include line diamiter to the GPM to have enough data to deduce pressure. Fancy math would then follow.
425 centimeters per hour equals 2.8 (2.78871391) inches per minute.
Assuming all the water becomes steam in that 1 minute: 1 gallon = 0.13368 cubic feet and the volumetric expansion of water into steam is 1675. Therefore 1 gallon of water will produce 1675 x 0.13368 = 223.914 cubic feet of steam. Which would also be 223.914 cubic feet per minute since the water is evaporated in 1 minute.
I'm pretty sure a gallon contains 1 gallon.
-- to convert the feet to inches, multiply by 12-- to convert the minute to second, divide by 60-- combining these operations, take (feet per minute) and multiply by (12/60) = 0.2
Formula: mph x 1,056 = inches per minute
10 m per minute = 393.7008 inches per minute = 393.7008/60 inches per second = 6.5617 inches per second.
An arc-minute is 1/60 of a degree. It is not a measure of length, so you can't convert it to inches.
There are 60 minutes per hour. So there are 60 times as many inches per hour as there are inches per minute.
I multiply it by 36 as there are 36 inches in each yard to get inches per minute and divide by 60 as there are 60 seconds in each minute to get inches per second.
The city of Unionville, Maryland holds the world record for the most rainfall in one minute. This record was set on July 4, 1956 with the rain gauge registering 1.23 inches of rain in one minute.
This question has no answer because you cannot convert meters to inches per minute.However,If the question were, "How can you convert 4.5 meters per second to inches per minute", then the process to arrive at this answer would be:4.5 * meters/second * inches/meter * seconds/minuteOne inch is the same as 2.54cm; so, we can use this fact to determine how many inches are in a meter.100cm/(2.54cm/inch) ~ 39.3701 inchesThere are 60 seconds in a minute.We now have all of the numbers we need ...The number we get is 4.5 * 39.3701 * 60 ~ 10629.93The unit we get ismeters/second * inches/meter * seconds/minute(simplify meters) -> 1/second * inches/1 * seconds/minute(simplify seconds) -> 1/1 * inches/1 * 1/minute(simplify numbers) -> inches/1 * 1/minute(simplify expression) -> inches/minuteThe full answer would then be ~10629.93 inches/minute
1ft = 12in 42in/min x 1ft/12in = 3.5ft/min
Divide by 2.54 and multiply the quotient by 60.
Use this formula to convert inches per minute to feet per hour:inches per second x 300 = feet per hour. So: 6 inches per minute x 300 = 1,800 feet per hour
The question needs to be clarified or corrected: feet per hour is [Length]/[time], and cubic inches per minute is [Length³]/[time]. They are not dimensionally equivalent.