You don't convert square feet into cubic feet.
"Square feet" describes area, meaning how much space there is on a piece of paper,
the floor of a room, or the front yard. Other units of area are "square inch" and "acre".
"Cubic feet" describes capacity or volume, meaning how much space there is in a bottle,
a carton, or a balloon. Other units of volume are "cubic centimeter" and "gallon".
If area units could be converted into volume units, then it would be possible to
calculate how many acres of gas you put in your car last month, and how many
gallons of carpet it would take to do your bedroom.
You do not.
A foot is a measure of distance while a square foot is a measure of area. The two measure different things and according to basic dimensional analysis conversion from one to the other is not a valid operation.
Multiply the length times the width and the answer is in square feet. Multiply length times width. Somethings three feet wide and six feet long. 3X6=18 18 square feet.
Feet is a measure of distance, square feet a measure of area.
Answer: 1 m² = 10.7639 ft² so:
400 x 10.7639 = 4305.564 ft²
how do I convert 80 feet into square footage?
If you have a square with 400 feet to a side, then the area is 400ft * 400ft, or 160,000 square feet.
Square feet can't be converted to feet. Square feet measure area, while feet measure length.
A square foot is a unit of area. A cubic metre is a unit of volume. The two units are therefore incompatible.
119 feet to square feet
Each of your pieces is (6 X 36) sq. in. or 216 sq in. There are 144 sq. in. in a sq. ft. SO, each piece is (216/144) sq. ft. or 1.5 sq. ft. So, you would need (225 sq. ft./1.5 sq. ft. per plank) or 150 planks.
400 cm equals 13.12 feet. 280 cm equals 9.186 feet. Therefore, 400 cm x 280 cm equals 120.6 square feet.
I think it means 10 feet by 10 feet, so 10 ft. x 10 ft. =100 ft. I may be wrong, but I'm pretty sure that's what it means.
Multiply meters (130) by 10.764 to get square feet. So:130 x 10.764 = 1,399.32 square feet.
1 acre = 4840 sq yd = 9 x 4840 = 43560 sq ft. 25000 sq ft = 25000 ÷ 43560 = 0.574 acres (3 dp)
400 (sq feet) = 37.161216 sq meters
Not in this universe. Sq ft measure area, feet measure length.
It is not entirely clear what the question is asking but the areas can be configured as80000 sq ft = 400 * 200 sq ft leaving an area of 400 * 200 sq ft, then 40000 sq ft = 400 * 100 sq ft leaving an area of 400 * 100 sq ft, then 10000 sq ft = 100 * 100 sq ft leaving an area of 300 * 100 sq ft, then 5000 sq ft = 100 * 50 sq ft leaving an area of 250 * 100 sq ft.
400 square ft = 37.16 square m
You cannot convert sq ft into yards, you must convert sq ft into sq yards. There are 9 sq feet in 1 sq yard so there are 283.33 sq yards in 2550 sq ft.
95 sq metres = 1023 sq feet.
900 (sq feet) = 83.612736 sq meters
1409 sq feet = 130.9 sq metres
Area = 24 ft * 12 ft = 24*12 sq ft = 288 sq ft
1 sq. ft = 0.092903 sq. metres1 sq. metres = 10.76391 sq. ft.
400 ft * 200 ft = 80000 sq ft = 1.837 acres (to 3 dp)
120,000 sq ft