Divide the square into five strips.
Select any one side and divide its length into 5 equal parts. Draw lines that are parallel to the adjacent side to the opposite side. This will divide the rectangle into 5 equal strips.
YES From your start point draw a line 5 units up, from this point draw a line 5 units across, from this point draw a line 5 units down, from this point draw a line 5 units back to the start. You have drawn a square with a total perimeter length of 20 units and a area of 25 square units.
Divide the base of the triangle into five equal lengths. Draw lines from the opposite vertex to each of these dividing points. The triangle will be divided into five parts, each with the same area. The base is 1/5 of the original base, and they all have the same height - the same as in the original triangle.
5 sq' = 5 x 5 = 25sq'
16
You can draw 10 equal rectangular parts to draw a square. First, draw a square. Then, split into ten equal portions with the dimension either 2 by 5 or 5 by 2. You cannot draw a square with 10 equal squared parts since 10 is not the perfect square. If we don't have the perfect square number of the equal parts, then we are not able to form a square. Actually, you obtain a rectangle.
Select any one side. Divide its length into 5 equal parts. Do the same to the opposite side. Join the corresponding divisions. You will then have 5 equal rectangular divisions of the square.
Select any one side and divide its length into 5 equal parts. Draw lines that are parallel to the adjacent side to the opposite side. This will divide the rectangle into 5 equal strips.
The rectangle is in fact a square with 4 equal sides of 5 units in length.
5
Draw polygonal figure with 5 equal sides.
1.25
Divide 3 inches in 5 equal parts
YES From your start point draw a line 5 units up, from this point draw a line 5 units across, from this point draw a line 5 units down, from this point draw a line 5 units back to the start. You have drawn a square with a total perimeter length of 20 units and a area of 25 square units.
If you have something that is 200 in diameter, and need 5 holes, you can measure it and put a hole at 0, 40, 80, 120, and 160. The holes would have equal spaces between them.
The square of 5 = 25 (= 5*5)The square root of 25 = 5
5 square rods is an area equal to 1,361.25 square feet.