(This does not work with mixed numbers, only fractions and improper fractions.)
Type the fraction as a division problem. For example three sixths would look like 3/6. Before pressing ENTER, press MATH and select the first option, >Frac. For example, if you are simplifying 3/6, you will see 3/6>Frac. Press ENTER to see the simplified fraction, in this case 1/2.
Enter the numerator of the fraction, the press the divide key, and enter the denominator. For example to enter the fraction two fifths, type 2/5. (The slash will appear when you press the divide key.)
If you want the answer to be a fraction, press MATH and then choose the first option, >Frac. You should see Ans>Frac. Press ENTER to see the previous answer as a fraction.
yes use the FRAC key (it's next to ☺)
The easiest way is to take a calculator, and divide the numerator by the denominator. If you are not supposed to use a calculator, divide the numerator by the denominator on paper.
Ok. First you make sure the denominator (bottom number) is the same on all the fractions. The easiest way to do this is to multiply the denominators together, then multiply each numerator by the opposite fractions denominator. This is the easiest way to do this, you will simplify later. ONLY DO THIS IF THE DENOMINATORS ARE DIFFERENT. If they are the same just add the numerators together to get your fraction. Then simplify.
This has the effect of producing a denominator in the answer that has each of the original denominators as factors. You don't have to worry about simplifying the fractions before multiplying. Of course, you may have to simplify after multiplying. There's no way out.
Check the manual of your specific calculator. What I have seen is usually something like the following: The calculator tends to automatically show fractions as mixed fractions. The calculator has a "fraction" key, often labelled ab/c. Pressing the "shift" key (or some similar key for "extra functions") followed by the fraction key will often to the desired conversion in the other way (from mixed to improper).
(This does not work with mixed numbers, only fractions and improper fractions.) Type the fraction as a division problem. For example three sixths would look like 3/6. Before pressing ENTER, press MATH and select the first option, >Frac. For example, if you are simplifying 3/6, you will see 3/6>Frac. Press ENTER to see the simplified fraction, in this case 1/2.
you can simplify your answer and when you simplify it and they're the same it's equivalent
Cross canceling is a way to simplify or reduce fractions before multiplying them. For example, 2/4 x 1/6 can be reduced to 1/4 x 1/3 by cross canceling.
There doesn't appear to be any fractions there but to find the LCD of fractions is done in the same way as finding the lowest common multiple of numbers.
The fastest and surest way to do that is to have a calculator that has a fraction button. (a b/c)
You can write this as 51:36.Note: You can simplify ratios the same way you simplify fractions; that is, if you find a number that is a factor of BOTH numbers, you can divide both numbers by that factor, to get an equivalent ratio.
The three-step method is the easiest way to subtract fractions. First, ensure that the bottom numbers, or denominators are the same. Then, subtract the numerators.Place the answer over the same denominator. All one needs to do now is simplify the fraction.
You multiply the numerators of both fractions, and place the result in the numerator of the result. Similarly, the denominator of the result is the product of the denominators of the individual fractions. For example: 2/3 x 3/7 = (2x3) / (3x7) = 6/21 You can simplify the result in the usual way. However, it is usually simpler to simplify before doing the actual multiplication. In the above example, you can cancel (eliminate) the 3 in the numerator with the 3 in the denominator before doing the actual multiplication.