0
How do you wire a 240V stove plug if old stove was hard wired and had 4 wires Black red white and ground coming from the wall are three wires Black red and a shield wire is the shield wire the neutral?
Wiki User
∙ 18y ago
Shield is ground. White is Neutral, center tap of the transformer from the power company.
Wiki User
∙ 18y ago
Add your answer:
Earn +20 pts
What is the color of live wire neutral wire and ground wire in Bangladesh.?
In Bangladesh the color of live is green and neutral is blue and ground is black.
How do you put on a four prong outlet on a roper electric dryer?
Black & Red are hot, and White is neutral. If it has no place to connect neutral connect neutral to ground.
Should the black wire be bonded to the ground?
It depends on the color coding standards for what country you are in. In the US, the answer is no. The Neutral (white wire) is grounded at the service entrance to the building. The black wire should have roughly the same voltage to the neutral and to the ground. Something to be aware of: If you are using a meter and checking for continuity between the black wire and ground, it may tell you that they have continuity if the breaker is on.
Why Hot and neutral are both hot?
You'll have to explain your problem better.If HOT black and Neutral White in your house wiring are both hot then Neutral is NOT bounded to ground in main panel and neutral could be floating. There should be no voltage between Neutral and Ground (Bare wire in panel). By code if there are multiple panels Ground is only bonded to Neutral in th emain entry panel. I have seen cases where this bonding was not done. At your main panel check voltage between neutral and ground. It should be zero.
How do you connect a 240 v cooktop with 4 wires to a service panel with 3 wires?
The new cooktop has a 4 wire connection. Red & Black are hot. White is neutral, and green is ground. You existing panel is wired with 3 wires. Black & Red are hot and green is ground. There is no neutral wire. Connect the black to black, red to red, and then connect the white and ground together at the plug.
There are only 3 phases that come into house main fuse box so where does ground and neutral come from?
It is very rare to have three-phase electricity coming into a residence. One of the wires is probably the neutral (It will be white or black with white stripes.) The ground comes in from a ground rod near the main, and connects to the ground coming from the meter, AND (If the main fuse box is the first disconnecting means,) the neutral and ground bars have to be bonded together in the box.
What is the color of live wire neutral wire and ground wire in Bangladesh.?
In Bangladesh the color of live is green and neutral is blue and ground is black.
How do you put on a four prong outlet on a roper electric dryer?
Black & Red are hot, and White is neutral. If it has no place to connect neutral connect neutral to ground.
How do you hook up the distribution panel box with red white black and ground wires?
Without more information that appears to be a 240 volt circuit. Red & black would connect to the 240 volt breaker, white connects to the neutral bar, and ground conductor from the ground rods or ground plate connects to the neutral bar. Make sure that the bonding screw is in the neutral bar and it is screwed through to bond the distribution panel enclosure to the neutral bar.
Why Hot and neutral are both hot?
You'll have to explain your problem better.If HOT black and Neutral White in your house wiring are both hot then Neutral is NOT bounded to ground in main panel and neutral could be floating. There should be no voltage between Neutral and Ground (Bare wire in panel). By code if there are multiple panels Ground is only bonded to Neutral in th emain entry panel. I have seen cases where this bonding was not done. At your main panel check voltage between neutral and ground. It should be zero.
Should the black wire be bonded to the ground?
It depends on the color coding standards for what country you are in. In the US, the answer is no. The Neutral (white wire) is grounded at the service entrance to the building. The black wire should have roughly the same voltage to the neutral and to the ground. Something to be aware of: If you are using a meter and checking for continuity between the black wire and ground, it may tell you that they have continuity if the breaker is on.
Is it normal to read 120v on black and white AND black and ground?
It is normal to measure 120 volts from black (hot) to white (neutral), and it is normal to also measure 120 volts from black (hot) to bare (ground). While the hot wire stands alone, the neutral and ground wires are tied together at the service entrance -- so either one can serve as reference for making a measurement to the hot wire.
How do you connect a 240 v cooktop with 4 wires to a service panel with 3 wires?
The new cooktop has a 4 wire connection. Red & Black are hot. White is neutral, and green is ground. You existing panel is wired with 3 wires. Black & Red are hot and green is ground. There is no neutral wire. Connect the black to black, red to red, and then connect the white and ground together at the plug.
What color is the return wire of 110 vac?
White is the neutral wire. Black is hot, green is ground.
Why does a light turn when you place black to black and white to ground wire?
You don't say "turn off" or turn on". Light should be connected black to black and white to white and ground to ground. If you connect white to ground it will work, but you are then using the ground wire for an unintended purpose. Neutral is bonded to Ground at the panel. Current on ground wire could cause ground loops and may cause GFCI to trip if you have them in your house.
On a 208 120 volt 3 phase electrical system what is the color code for the wires?
208/120 is typical for the US, so these are the colors for the US: A phase: black -------------------In Canada; A phase - Red B phase: red-------------------------------------B phase - Black C phase: blue -----------------------------------C phase - Blue neutral: white -----------------------------------neutral: white ground: green or green with yellow stripe
What colour wire is negative - green or black?
Most likely your "purple" was once black, and is the negative; to verify, trace "purple" to ground, or touch the leads of an ohmmeter to purple and ground. You should get "0" ohms at the correct wire. This assumes a negative ground.
