answersLogoWhite

0


Best Answer

Explain in more detail what you mean. What is between: the switch or the light? What are you trying to accomplish with this setup? The term 3-way switch means 2 switches controlling one or more lights. If you have 2 lights and one switch then you need a standard 75 cent switch. Generally with 3-way switches, there are 3 wires not including the ground, black, white and red. some houses attach the white to the switch, some attach the black. Generally the white will feed through the box not attaching to anything but another white wire. The black will attach to the upper and lower screws on one side of the switch while the red attaches to the opposite side. The red goes to the other switch and black goes to the light fixture(s).

User Avatar

Wiki User

18y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you wire multiple lights on a 3-way switch with one between and one not?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Natural Sciences

What does a 4 way switch do?

For starters, a four way switch must be connected to either a four way switch or a three way switch on either side. Said differently, here are some common combinations: 3way---------4way-----------3way 3way---------4way-----------4way------------3way 3way---------4way-----------4way------------4way----------------3way etc. If you are using a four way switch anywhere in a circuit both ends must have three way switches. You can use as few as one four way between the three ways, or as many as you would like. First of all, connect your white (neutral) wire straight through every box, from the power source to the light fixture being controlled. That neutral has nothing to do with the switches. On your three way switches you will see two bright screws and one dark. (Excluding the green grounding screw). One three way switch will have its dark screw connected to the power source. Two wires will run from the bright screws to the next box (the 4 way switch box). Those two wires will connect to the two bright screws on one side of the four way. The four way also has dark screws, but two of them. Connect two wires to these two dark screws, and run them to the next switch box. If the next switch box is another 4 way, repeat this again and again until you get to the last switch (a three way). Wire the last three way as follows: the two wires coming from the previous 4 way go to the bright screws. The hot wire feeding the light fixture will be the one to connect to the single dark terminal of the last 3 way switch. That's it! As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.If you do this work yourself, always turn off the powerat the breaker box/fuse panel BEFORE you attempt to do any work AND always use a meter or voltage indicatorto insure the circuit is, in fact, de-energized. IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.


How is one light controlled by three switches?

That is called a 4 way light switch circuit. On each end of the circuit you install a 3way switch and in the middle you install a 4 way switch.Answer using British TerminologyIn the UK, 'three-way' switches are called 'two-way' switches (more logical, if you think about it!), and the 'four-way' switch is called an 'intermediate' switch.


Can you replace a 3-way light switch with a standard switch and cap off the wires or can you use the 3-way switch and make it into a standard switch?

It can be done but it requires knowledge about how a 3way is wired to convert it to a regular switch. It would involve testing live wires to determine where power starts at. You can't just replace one switch.


How do you connect two way electrical switch?

The two way switches work in pairs. We find most of them in our houses where the light bulb can be operated by two switches each at the far end to the other. Each switch consists of three terminals two of which are connected. When one switch is open and the other is closed then the bulb glows and viceversa


Can you connect black wire to red wire?

In some cases in residential wiring you do. From a light fixture junction box to a switch box, the cable is a two wire, black and white. To connect the switch into the circuit at the fixture box, the "hot" conductor is connected to the white wire that goes down to the switch. The switched "hot" comes back on the black wire and this is then connected to the fixtures black wire. The white (neutral) is picked up in the fixtures junction box and connected to the fixtures white wire.

Related questions

How do you control a lamp from three different positions?

we use 2-3way switch and 1-4way switch


How do you wire a one light to be operated from 4 location?

you will need 2-3way switch and 2-4way switch


You have an outlet with three light switches controlling three different lights what is this called?

A triplex outlet. It is a simple device unless one or more of these switches are "3way" switches.


What are the release dates for 3Way - 2008?

3Way - 2008 was released on: USA: 4 February 2008 (Los Angeles, California)


What are the release dates for 3Way - 2008 LadyCops Brotherly Love?

3Way - 2008 LadyCops Brotherly Love was released on: USA: 6 July 2009


What are the release dates for 3Way - 2008 Psychodrama 1-7?

3Way - 2008 Psychodrama 1-7 was released on: USA: 7 April 2008


What does a 4 way switch do?

For starters, a four way switch must be connected to either a four way switch or a three way switch on either side. Said differently, here are some common combinations: 3way---------4way-----------3way 3way---------4way-----------4way------------3way 3way---------4way-----------4way------------4way----------------3way etc. If you are using a four way switch anywhere in a circuit both ends must have three way switches. You can use as few as one four way between the three ways, or as many as you would like. First of all, connect your white (neutral) wire straight through every box, from the power source to the light fixture being controlled. That neutral has nothing to do with the switches. On your three way switches you will see two bright screws and one dark. (Excluding the green grounding screw). One three way switch will have its dark screw connected to the power source. Two wires will run from the bright screws to the next box (the 4 way switch box). Those two wires will connect to the two bright screws on one side of the four way. The four way also has dark screws, but two of them. Connect two wires to these two dark screws, and run them to the next switch box. If the next switch box is another 4 way, repeat this again and again until you get to the last switch (a three way). Wire the last three way as follows: the two wires coming from the previous 4 way go to the bright screws. The hot wire feeding the light fixture will be the one to connect to the single dark terminal of the last 3 way switch. That's it! As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.If you do this work yourself, always turn off the powerat the breaker box/fuse panel BEFORE you attempt to do any work AND always use a meter or voltage indicatorto insure the circuit is, in fact, de-energized. IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.


What are the release dates for 3Way - 2008 Siobhan Sizzles 1-8?

3Way - 2008 Siobhan Sizzles 1-8 was released on: USA: 13 April 2008


Do pioneer 3way 6x9 speakers fit in the rear doors of a 2002 accord coupe?

Do pioneer 3way 6x9 speakers fit in the rear doors of a 2002 accord coupe?


How do you insulate 3way valve for the fcu?

You insulate the 3way valve for the FCU to control temperatures. If the valve is left uninsulated, the contents will either lose or gain temperature depending out external conditions.


What are the release dates for 3Way - 2008 Rhonda Rapid Delivery 1-9?

3Way - 2008 Rhonda Rapid Delivery 1-9 was released on: USA: 20 April 2008


How is one light controlled by three switches?

That is called a 4 way light switch circuit. On each end of the circuit you install a 3way switch and in the middle you install a 4 way switch.Answer using British TerminologyIn the UK, 'three-way' switches are called 'two-way' switches (more logical, if you think about it!), and the 'four-way' switch is called an 'intermediate' switch.