The exponent tells you how many times the base is used as a factor.
10^4 = 10 x 10 x 10 x 10
154
A three-phase 'unbalanced' system refers to the load, as the supply voltages are unaffected by load. So the phase-angle and, therefore, the power factor of each phase will be different -i.e. there will be three different power factors.
Two factors reduce the power used by a piece of equipment compared to the volt-amps drawn from the supply: power factor and harmonic factor. Both factors increase the power transmission losses incurred in supplying a given amount of power.The power factor is less than 1 when voltage and current are out of phase with each other.When they are in phase the power equals the volt-amps except for a nonlinear load with a current that is not proportional to voltage. This generates harmonics in the current and the effect is that the power is less than the volt-amps, by an amount equal to the harmonic factor.
Watts = Volts x Current x Power Factor. Power Factor is one for resistive loads and less than one for reactive loads. If you assume 80% load factor on your 10 amp circuit that is 8 amps. So each of three devices would have to operate on 2.66 amps. To do this the applied voltage for each device would have to be 900 volts.
It depends on how the capacitor is connected and whether the supply voltage is a.c. or d.c. Assuming you are talking about a power-factor improvement capacitor (connected in parallel with an inductive load, supplied with a.c.), then the supply current will reduce.
112
yes
103 = 10 x 10 x 10
5^3 = 5 x 5 x 5
10 to the third power equals 10 times 10 times 10
The power refers to the base and exponent, so to write it as the product (multiplication answer) of the same factor you would expand the exponent for example: 7^2 = 7*7 or 4^6 = 4*4*4*4*4*4.
3 to the third power = 3 x 3 x 3
step 1 write each mixed number as an improper fraction step 2 look for common factor and simplify step 3 multiply write the product as a mixed number
Step 1 : Prime Factorise each number and write in index notation. Step 2 : Multiply the lowest power of each common factor of the given numbers
Each number is called a factor. The answer is the product.
In the equation 4 x 9 = 36, the product (36) is greater (larger) than each factor (4 and 9).
The question is probably showing how to multiply numbers that are to powers but have different bases that are factors of each other using power rules rather than a calculator. Example: 2^13 x 8^2 = 2^13 x (2^3)^2 = 2^13 x 2^6 = 2^(13+6) = 2^(19). You can double-check answers with a calculator.