Study guides

Q: What is scale reported as when map distance is the numerator and ground distance as a denominator?

Write your answer...

Submit

Related questions

It can be expressed in that form or as its reciprocal.

If you swap the input and ground of a circuit, the transfer function becomes 1 - H(s), if the original circuit's transfer function was H(s). If H(s) = Numerator(s) / Denominator(s), putting all terms over a common denominator gives: 1 - H(s) = ((Denominator(s) - Numerator(s))/Denominator(s). Often this subtraction in the numerator produces in complex zeros, which can be desirable.

The scale. It can be indicated by a scale bar and/or a ratio 1:n. The number n is called scale denominator. This enables the map user to measure a distance on the map and determine the distance on the ground.

Yes, bar scales are used to convert map distance to ground distance.

A good way to measure ground distance is by pace count.

Is the relationship between the distance measured on the map to the actual distance on the ground

The differences between the these two is that linear scale shows the relation between the map distance and the ground distance. The nonlinear scale do not show the relation between the map distance and the ground distance.

There is a code that regulates the minimum distance from ground level to window bottom in basements. It should at least be 36 inches from the ground.

Distance on the map to distance on the ground is converted using the scale on the map.

They are put on the ground with equal distance and then trains can ride on them instead of on the ground...

They are put on the ground with equal distance and then trains can ride on them instead of on the ground...

aerial distance is measured through the air as opposed to ground travel

Ground clearance in a substation is the distance between wires and the ground or other objects such as buildings. Sectional clearance is the distance between the wires themselves in a substation.

The distance the aircraft travels on the ground before lifting off, or the same when landing.

the relationship of distance measured on a map and the corresponding distance on the ground.

The average distance traveled by a tornado is about 5 miles.

the relationship of distance measured on a map and the corresponding distance on the ground.

It is called the scale ruler.

cloud ceiling

cloud ceiling

Pace Count

Pace Count

A map scale lets you convert map distance to ground distance.

5 feet

No. The horizontal distance depends on how close the the ground the gun is. From the firing position, a bullet dropped to the ground will strike the ground in the same time as a bullet shot horizontally forward.