0
How does conversion involving volumes ft to the third to m to the third differ from standard conversions ft to m?
Wiki User
∙ 12y ago
The conversion is cubed
1 m = 3.28 ft
1 cu m = 3.28 x 3.28 x 3.28 = 35.29 cu ft
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Is 1ml over 1 cm cube a valid conversion factor?
Yes. They are identical volumes, so the value of the fraction is ' 1 '.
How are linear units square units and cubic units different?
Lines are measured with lines. For example, the length of a road is measured with standard lines (linear units) such as yards, miles, meters or kilometers. Areas are measured with areas. A field is measured with standard areas (usually square units) such as square yards, square miles, or square kiometers. Volumes are measured with volumes. A container is measured with standard volumes (often cubic units) such as square inches or square centimeters. Look out for calculations involving linear, square and cubic units. For example, a square measuring three inches on the side has an area of 3 x 3 = 9 square inches. A cubical tank measuring five meters on each side has a volume of 5 x 5 x 5 = 125 cubic meters.
What is Production volumes?
production volumes are the amount of volumes producd in a day
What is two tenths of an ephah in kilogrammes?
There is no equivalence. A kilogram is a measure of mass. An ephah is a measure of volume. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid. The masses of equal volumes of the two substances will clearly be very different. So there is no direct conversion between mass and volume: you need to know the density of the substance to enable you to carry out the conversion.
How many quarts are in one fourth of a ton?
A ton is a measure of mass. A quart is a measure of volume. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid. The masses of equal volumes of the two substances will clearly be very different. So there is no direct conversion between mass and volume: you need to know the density of the substance to enable you to carry out the conversion.
How do you convert between cubic centimeters and milliliters?
No conversion is necessary. The 'ml' and the 'cc' are identical volumes.
3inches in mm?
3 inches = 76.2 mmYou can type "3 inches into mm" into www.google.com to get the conversion. This works for most conversions of any type (length, volumes, energy, temperature, currency (don't know how well this works), weight, etc). It also does calculations (and calculations with units). I use this for some calculations in my research.
For which of the following conversions of volumes do you need first to format the original volume?
NT file system (NTFS) to 32-bit file allocation table (FAT32)
Why volumes of gases are converted into STP conditions and then compares?
Since volumes of gases change with temperature and pressure, a standard value of temperature and pressuure is chosen to which gas volumes are referred. Hence volumes of gases are converted into S.T.P. conditions and then compared easily.
What is Universal conversion between weight and volume?
There is none. Consider a kilogram of air and a kilogram of lead. The two will have considerably different volumes.
Is 1ml over 1 cm cube a valid conversion factor?
Yes. They are identical volumes, so the value of the fraction is ' 1 '.
What is a scuff for natural gas transportation?
It is how you measure gas volumes: "scf"= standard cubic foot of gas.
Could you provide the list of household measurement to standard measurements?
There is no list of household measurements, so a systematic list is not possible. Lengths, masses and larger volumes are measured in standard (SI) units. For smaller volumes: 1 teaspoon = 5 ml 1 tablespoon = 15 ml
How many milliliters are in 3 centimeters?
None, since there can be no conversion. A centimetre is a measure of length in 1-dimensional space while a millilitre is a measure of volume in 3-dimensional space. The two measure different characteristics and, according to the most basic principles of dimensional analysis, any attempt at comparisons or conversions between the two are fundamentally flawed.
How are linear units square units and cubic units different?
Lines are measured with lines. For example, the length of a road is measured with standard lines (linear units) such as yards, miles, meters or kilometers. Areas are measured with areas. A field is measured with standard areas (usually square units) such as square yards, square miles, or square kiometers. Volumes are measured with volumes. A container is measured with standard volumes (often cubic units) such as square inches or square centimeters. Look out for calculations involving linear, square and cubic units. For example, a square measuring three inches on the side has an area of 3 x 3 = 9 square inches. A cubical tank measuring five meters on each side has a volume of 5 x 5 x 5 = 125 cubic meters.
Is there a standard for measurement of syringe dose accuracy?
Yes, ISO-7886 Standard for Hypodermic Syringes for Single Use, contains accuracy ranges for syringe sizes relative to fill volumes.
What is meant by a volume of STP?
Most commonly, this refers to the volume of a gas at Standard conditions of Temperature and Pressure (often abbreviated, STP). This standard allows accurate comparisons of volumes. The volume of a gas (any gas) at STP is 22.4 liters per mole.
