0
What else can I help you with?
What size rectangle table will seat 6 comfortably?
36"by 72" is a common size for six people. Two people can fit easily on the two long sides. And one person can fit on each end. If space is tight, a 30" by 60" table might also work. The key is to try to allow a minimum of 30" of table side space per person.
The perimeter of a table is 30 feet It is twice as long as it is wide What is the length of the table?
Length of the table is 10 feet.
How long will be the side of a rectangular table whose area is 1500 cm and width of 30cm?
1500/30 = 50 cm in length
If it takes 2 people to dig a 20 by 30 ditch how long does it take 4 people?
45 minutes
Is 30 and 40 multiples of 10?
A multiple of a number is in that number's times table. For example, a multiple of 10 will be in the 10 times table. 30 = 10x3 40 = 10x4 Therefore, 30 and 40 are multiples of 10
How many people can sit at a table 30 X 72?
Assuming each person needs about 24 inches of width, a table 30 X 72 inches can comfortably seat around 8-10 people.
What size chair is recommended for a 30-inch table?
A chair with a seat height of about 18 inches is recommended for a 30-inch table.
What size rectangle table will seat 6 comfortably?
36"by 72" is a common size for six people. Two people can fit easily on the two long sides. And one person can fit on each end. If space is tight, a 30" by 60" table might also work. The key is to try to allow a minimum of 30" of table side space per person.
What type of chair would be the most suitable for a 30-inch table?
A standard dining chair with a seat height of around 18 inches would be the most suitable for a 30-inch table.
How many people can sit comfortably at a 30 x 30 table?
4 people
The perimeter of a table is 30 feet It is twice as long as it is wide What is the length of the table?
Length of the table is 10 feet.
What size round table is needed to seat 10 people?
When planning how many people you are able to seat at a round table, the following are event industry standards: 30" table=2-4 people 36" table=4-5 people 48" table=6-8 people 54" table=8-9 people 60" table=8-10 people 66" table=9-11 people 72" table=10-12 people If you'd like to be more specific, or are using nonstandard sized tables, a good rule of thumb is to allow 18-24 inches of linear space per person. Based on the number of people you are seating at the table, calculate the total amount of linear inches you'll need per table, then divide that number by Pi (3.14) to figure the diameter of the table you will need. For example, here is the calculation for the size of a round table for 10 people: 10 guests x 21 inches per guest = 210 total linear inches 210 total linear inches / 3.14 = 66.88 inches in diameter Based on this calculation, you will need a table that is at least 66.88 inches in diameter to seat 10 people, allowing 21 inches for each seat. For an accurate estimate, be sure to consider are the width of the chairs you'll be using. Metal folding chairs are typically 17-19 inches wide, while rental ballroom chairs are only 16.3 inches wide. Another consideration is the place setting you'll be using at each seat. If it is an elaborate place setting with a charger and multiple pieces of flatware, then calculate the space needed per person accordingly.
What diameter of dining table is required to seat 6 people?
Each person requires at least a 24 inches for eating space. This means a 4 ft diameter table will fit 6 people. That is a bit crowded though, so I would shoot for 30 inches instead. That would mean you should have 5 foot diameter table for 6 people.
How many people can sit at a 42 inch table?
How many people can sit at a 72" x 30" x 42" table
How many people can sit round a 42 inch round table?
How many people can sit at a 72" x 30" x 42" table
What is the standard dining table height?
The standard width of a dining room table will depend on the shape. Rectangle, square and oval tables have a standard width of 36 inches. A round table will have either a 44 or 54 inch diameter depending on how many people it will seat.
How big are the standard banquet tables?
The standard rectangular banquet table is eight feet long and comfortably seats eight to ten people. A six foot rectangular model is also available and seats six to eight people. Round banquet tables are available in 30", 48", 60" and 72" diameters. These seat as few as four (30") and as many as ten (72"). Round tables are less efficient in terms floor space.
