The answer depends on whether the octagon is inside the circle or outside (tangential).
There is insufficient information to answer the question. There is no indication that the octagon is regular and therefore, you may not assume that it is. Even it you were told that it is a regular octagon, there is still insufficient information: the answer will depend on what the 17.25 inch is a measure of - the diagonal of the octagon or its height (width).
howlong,to the nearest inch, is each of the sides of an octagonal acre /
Each side of the 48 inch perimeter is 6 inches long, therefore there are 48 / 6 = 8 of them. The figure is a regular octagon.
It is an octagon each of whose sides is 5 cm long and each of whose interior angles measures 135 degrees.
Each side is 56/8 (7).
If the permiter of a regular octagon is 8z-16, then the length of each side would be the perimeter / 8 or 2z-2
It depends how long each side is. An octagon's sides do not have to all be the same length, they can vary from octagon to octagon. A regular octagon's sides are all equal so the sum of their measures would be 8 times the length of any one side..
The length of a single edge of an octagon can be calculated by measuring the diameter, then dividing this length by the square root of the sum of four and two times the square root of two, which would be written in a calculator as sqrt(4+(2*sqrt(2))). In this case, a five inch diameter equates to approximately 1.913 inches per side.
Polygons do not have diameters. Is the 11.25" from one point to the opposite, or from one side straight across? The two are quite different and will give a different answer for the side length.
You remove right angled triangles whose legs are 3*[2-sqrt(2)] = 1.7574 inches long.
Circumference of a 25 feet circle = pie x diameter x 12 942.477 inch 1 feet = 12 inch so i converted into inch as i am having the other component in inch No of 12 inch long blocks = circumference /12 so total 78 pieces will be required to make a circle of dia 25 feet
The side length is 1.82 units.