0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is 599 square feet in square meters?
599 square feet is 55.65 square meters.
How many square feet in 24x30 meters?
24x30 meters (720 square meters) equates to 7,750.02 square feet.
What is 350 square meters in foot?
350 square meters is 3,767.4 square feet.
What is 1050 square feet in meters?
1,050 square feet is 97.55 square meters.
How many square yards 2.8 square meters?
2.8 square meters = 3.35 square yards
How many paving blocks size 10cm by 20cm required 12 square meter?
10 cm = 0.1 meter 20 cm = 0.2 meter Each block covers (0.1 x 0.2) = 0.02 square meter. To cover 12 square meters, you need 12/0.02 = 600 blocks.
How many square ft is 100x200 ft?
100-ft x 200-ft = 20,000 square feet
How many paving bricks are needed for 28 square meters?
The answer, not surprisingly, depends on the size of the paving bricks. And since you have not bothered to share that crucial bit of information, I cannot provide a more useful answer.
How many block paving slabs do are need for eight square meters?
Depends on the linear dimensions of both the slabs and the ground.
How may paving flags would you need for a square meter if my flags are 300mm x 300mm?
A square meter is 100x100 which means there are 10000 sq cm in a sq meter. Your blocks are 450mmx450mm which means that they are 45cm x 45 cm 45x45=2025 10000/2025= 4.94 paving flags. However, you might want to calculate the amount of blocks needed for the entire area you're paving, not for each meter. Always remember to round up and leave yourself some extras, Keep in mind that you may need to leave some gap between the blocks, and that doing so may help you use fewer blocks. For example if you are paving an ally a meter wide, then leaving a gap of three centemeters at the sides of the ally and three centemeters betweed the blocks will mean you get away with using two blocks width and don't need to cut any blocks (which would be a pain in the neck).
How many acres are 100x200 ft?
One acre has 43,560 square feet. Divide the number of square feet by that and you get the number of acres. This gives you an answer of .459 acres.
How many 400mm long x 200mm high x 200mm deep blocks can cover 3280 square meters?
41,000 of them.
How many paving brick are needed per sq metre?
Varies depending on the size of the bricks.Paving blocks come in various sizes depending on the type of paving.Standard paving blocks are are of pre cast concrete 100 mm by 200 mm the thickness varies. The heavier the traffic the thicker the blocks.There are however, standard thickness's, 50 mm, 80 mm, and 100 mm are the most common.For instance on a house driveway 50 mm blocks would be the most favoured, whilst on a dockyard which is used by heavy vehicles 100 mm blocks would be the choice.You would need 50 standard blocks to cover one square metre.
How many no of blocks required for one square meter?
There are 10 blocks in a square meter
12 square meters x 12 square meters equals how many square meters?
144 square meters
What is the formula for square meters?
meters times meters = square meters
How much is asphalt paving in Connecticut?
$2.00 per square foot-residential
