One fat quarter yields twelve 5 inch squares
32 of them
You need to cut a 9 foot piece of plywood into 12 inch sections. Every cut also removes 1/8 inch. How many 12 inch sections can you get out of the 9 foot piece of plywood?
Five. Anything cut into fifths will produce five pieces.
12
I think the answer is 12 long sticks.
You will get 36 pieces.
Straight cut is like taking a scissors and cutting straight up the paper about quarter inch wide and full length of the document. The cross-cut is also known as the "Confetti" cut. Small pieces of the shredded document, about a quarter inch wide and inch long.
Depends how many times you cut the cheese.
The answer depends on the shape of the 9 square foot piece of fabric. If the piece is 36 feet x 3 inches, for example, you will not get a single 5 inch square from it.
If the squares do not have to be the same size, then the best that you can do is 9x9 and 4 lots of 2x2 making a total of 97 square inches and a remainder of 2 sq inches.
196 full squares. If you can cut the 6x6 squares in thirds to fill the excess then it's 200 2/3.
Quarter-cut diamond may be a pattern description. Diamond stones are not usually described as 'quarter-cut'.
The stringers for stairs are cut with a 7 inch riser and a eleven inch tread. Once all the framing and trim work is done you end up with six and a quarter inch high step.
That would depend on how it is sliced. According to my cousin Howard, that's one serving. Cut into 2 inch squares (cubes), you'd get 54 servings.
Barrels have been cut down. 100-175 USD
Squares are actually also rectangles so you could make 8 rectangles without touching any of the squares. However, if you could cut the squares, that would be a different problem....
Area of a Square is given by s^2 (s = length of a side)Using that, the area of one of the small squares is 7^2 = 49cm^2Now, how many of these squares can be cut out of a 240cm^2 square is given by:240/49 = 4, 89 squares = 4 complete squares or Just less than 5 Squares.