0
Do you mean 'per phase' or do you mean 'per line'? The conductors that connect a three-phase supply to its load are called 'lines' not 'phases'.
If you mean 'per line', and the load is balanced, then you can manipulate the following equation to make the line current (IL) the subject:
power = 1.732 EL IL (where EL = line voltage = 380 V)
If you really DO mean 'per phase', then it's necessary for you to specify whether the load is star (wye) or delta connected.
Wiki User
∙ 9y ago
Wiki User
∙ 14y agoOhm's Law - Volts times Amps = Watts. For 5000 Watts at 120 Volts, the Amperage would be 41.667.
Add your answer:
Earn +20 pts
How much damage does a 100kW laser do Would it be powerfull enough to stop a tank or shoot down a jet What would happen if it was shot at a solid rock surface or a person?
I know a 4KW gas laser can cut 1 1/4" into average grade steel. Assuming you're refering to this type of laser then 100kw gas laser should be able to cut into about 2 feet of steel. Yikes. Imagine if it were a 100kw chemical laser!!
How much current does 60 watts Operated at 120 volts have?
60 Watt 120 Volt is: W/V (60/120), Equals 0.5 Ampere.
What is 1.5amps 115 volts equal to in watts?
There really is no fixed answer. Amps are a measure of current, while watts are a measure of work. To get the answer, you need to know either how many volts you are dealing with, or how much resistance; the relationship is W= V*I (where I is the current in amps). That said, for a typical 120 volt household current, the number of watts would be 180.
How to Divide 160 watts into 120 volts?
if you have 160 volts how much would that be in watts
18 ampers 3 phase 415 volts how much kilowatt?
Volts x Amps = Watts, divide with 1000 and you get kilowatts.
How much damage does a 100kW laser do Would it be powerfull enough to stop a tank or shoot down a jet What would happen if it was shot at a solid rock surface or a person?
I know a 4KW gas laser can cut 1 1/4" into average grade steel. Assuming you're refering to this type of laser then 100kw gas laser should be able to cut into about 2 feet of steel. Yikes. Imagine if it were a 100kw chemical laser!!
How much phases dos the moon have?
The moon has 8 phases
How much current does 60 watts Operated at 120 volts have?
60 Watt 120 Volt is: W/V (60/120), Equals 0.5 Ampere.
What is the difference between three phase load and phase supply?
How much current equipments are drawing from three phases (combined or individual) is called three phase load and how much supply we are getting from source is called three phase supply. Ex. In INDIA single phase supply is 220 volt ac with neutral. So in three phase supply all RYB phases should be 220 volts ac with neutral individually. If we calculate with phase to phase than it shoulb be 415 volts ac.
How much volts used in car batteries?
12 volts
What is 1.5amps 115 volts equal to in watts?
There really is no fixed answer. Amps are a measure of current, while watts are a measure of work. To get the answer, you need to know either how many volts you are dealing with, or how much resistance; the relationship is W= V*I (where I is the current in amps). That said, for a typical 120 volt household current, the number of watts would be 180.
Can a home have 450 volts in it and how much amps do you need for this many volts?
Homes do not normally have a 450 v supply and domestic equipment can not be bought for 450 v. For any voltage the current in amps equals the power in watts divided by the votage (and an extra allowance for power factor).
How much resistance to drop 19.2 volts to 11.5 volts?
Information is inadequate to answer the question
How much volts can you run thur 6-3 uf wire?
600 Volts
How to Divide 160 watts into 120 volts?
if you have 160 volts how much would that be in watts
How much volts to use a 9 mag tattoo needle?
How many volts for a 9 mag
How much voltage does an automobile battery supply?
100% charge = 12.6 volts 75% charge = 12.4 volts 50% charge = 12.2 volts 25% charge = 12.0 volts
