draw 0.104 amps
It depends on the voltage and whether the lamps are actually 40 watts or 40 watt equivalent. Watts / volts = amps
That varies a lot, depending on the type of light bulb. The old-fashioned incandescent light bulbs produce much less light, for the same power, than the fluorescent light bulbs.That varies a lot, depending on the type of light bulb. The old-fashioned incandescent light bulbs produce much less light, for the same power, than the fluorescent light bulbs.That varies a lot, depending on the type of light bulb. The old-fashioned incandescent light bulbs produce much less light, for the same power, than the fluorescent light bulbs.That varies a lot, depending on the type of light bulb. The old-fashioned incandescent light bulbs produce much less light, for the same power, than the fluorescent light bulbs.
The amps drawn by a 65 watt light bulb should be 65/120 or 0.54167. This fraction of an ampere may be restated as 541.67 milli-amps.
1100 watts or about ten amps then another 3 to 4 amps for turn table light and fan
Depends on the size of the LED light and the voltage applied. An example is an LED 24 volt globe light that pulls 8 watts which draw 0.333333 amps. Take an LED 120 volt light bulb draws 12 watts and will pull 0.1 amps. The same bulb at 240 volts wil draw 0.05 amps. it really depends on the watts and voltage applied. An average would be about 0.1 amps.
If it is a 120volt light, then it is watts / volts. 32 watts / 120 = .2667 amps. <<>> fluorescent lights usually have a power factor around 0.6 so a 32 watt bulb would take around 32/(120 x 0.6) amps or 0.44 amps.
A 55 watt fluorescent light only pulls 0.4 amps. Lights can be installed on a 15 amp breaker using 14/2 wire. A maximum of 1440 watts is all that is allowed on a 15 amp circuit.
The amperage is printed on the ballast. If your meter reads higher that that what is printed there, then the ballast is drawing more amps that it should.
A 120 volt table lamp with a 75 watt bulb will pull 0.625 amps. With a 100 watt bulb it will pull 0.833 amps. And with a modern fluorescent 13 watt bulb it will pull 0.108 amps.
It depends on the voltage and whether the lamps are actually 40 watts or 40 watt equivalent. Watts / volts = amps
About 0.6 amps for a 12v 21w bulb
The amps (ampiers) decrease when in a series circuit ( with a light bulb)
To answer this question the voltage has to be given. I = W/E. Amps = Watts/Voltage.
Watts= voltage times amps. So if you divide Watts by voltage, you will get amps = .33333 or about a 1/3 amp load. This is assuming a 120 volt circuit.
That varies a lot, depending on the type of light bulb. The old-fashioned incandescent light bulbs produce much less light, for the same power, than the fluorescent light bulbs.That varies a lot, depending on the type of light bulb. The old-fashioned incandescent light bulbs produce much less light, for the same power, than the fluorescent light bulbs.That varies a lot, depending on the type of light bulb. The old-fashioned incandescent light bulbs produce much less light, for the same power, than the fluorescent light bulbs.That varies a lot, depending on the type of light bulb. The old-fashioned incandescent light bulbs produce much less light, for the same power, than the fluorescent light bulbs.
amps equals watts divided by volts.
1100 watts or about ten amps then another 3 to 4 amps for turn table light and fan