Best Answer

1 mile = 5,280 feet

1 foot = 12 inches

1 gallon = 231 cubic inches

Volume = (5,280 x 12)2 x (12) cubic inches = 208,544,914.3 gallons

Q: How many gallons are there in one square mile BY 12 INCHES?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

there are 12 inches in a foot and 5280 feet in a mile 63,360 inches in a mile.

There are 12 inches in a foot. There are 5,280 feet in a mile. Multiply them and you get 63,360 inches in a mile.

If the oil is barely visible it would take something like 25 gallons to cover one square mile. If the appearance of the oil is of bright bands of colour, then 200 gallons per square mile. Thick oil spills amount to 1330 gallons per square mile

Gallons per mile? No vehicle burns that much fuel.

1 square mile = 27,878,400 square feet.

Related questions

A square mile is equal to 27,878,400 square inches.

4,014,489,600

To convert square miles to square inches, you need to multiply by 27,878,400 (since 1 mile = 63,360 inches approximately). 3.79 million square miles x 27,878,400 square inches per square mile = approximately 105.8 trillion square inches.

There are 4,014,489,600 cubic inches in one square mile. This calculation is derived by converting one square mile to cubic inches, which involves multiplying the area in square inches by the depth in inches.

A square mile is equal to 27,878,400 square feet (5,280 x 5,280). One square foot equals 144 square inches (12 x 12). So, a square mile is equal to 4,014,489,600 square inches (27,878,400 x 144). That's over four billion -- with a B.

Gallons and square miles can't be compared; a gallon is a measure of volume, whereas a square mile is a measure of area. But let's try to make sense of the apparently nonsense question. What if the question poster had asked, "How many gallons are there in a one-square-mile puddle of water that is a quarter of an inch deep?" That calculation is non-trivial and may yield an answer that is surprising. Here are some units and conversions that may be helpful: 1 square mile = 27878400 square feet1 inch = 0.083333 foot1 cubic foot = 1728 cubic inches1 gallon = 231 cubic inchesIf you did the arithmetic right, that rather large puddle contains 4,344,685.7 gallons of water. (The proof is left to the reader.)

I think it is 10,560 gallons

(1 mile)3 x (5,280 feet per mile)3 x (12 inches per foot)3 / (231 cubic inches per gallon) =1,101,117,147,428.57 gallonsor 1.10112 trillion gallons (rounded)

Approximately .067 gallons to the mile.

there are 12 inches in a foot and 5280 feet in a mile 63,360 inches in a mile.

There are 63,360 inches in one mile.

There are 63,360 inches in one mile.