Circumference = Pi X Diameter; Pi (3.141590) x 66 = 207.3 In.
1 foot = 12 inches so a table that is 6 ft long is 12*6 = 72 inches long.
If the table height is 29 inches standard then 96 inches is perfect fit which gives the drop up to the floor.
30 inches diameter or 93 inches circumference
5 feet 1 inch=61 inches
3/4 of an inch = .75 inches.75 inches = 1.905 centimeters
There would be 2 hundredths of an inch in 2 inches
The circumference of an 8 inch circle is: 25.13 inches(diameter x Pi = circumference).
circumference = 2 times pi times r OR pi times d diameter = 60 inches pi = 2.1415927 circumference = 2.1415927 x 60 = 128.4956 inches (approximately 128 1/2 inches)
circumference = 17pi inches
(6 pi) inches.
I assume you want the circumference which is pi times the diameter, so for 37 inch diameter the circumference would be about 116.24 inches.
All depends what you mean by 18 inches, is that the circumference, the diameter or the radius
If the table height is 29 inches standard then 96 inches is perfect fit which gives the drop up to the floor.
you have to quote the diameter or radius or circumference of the circle to calculate the area. If diameter 78.53. If radius 314.15. If circumference 7.95
7 foot circumference X 12 inches/foot = 84 inches in circumference
Since round table cloths are measured on the diameter, not the circumference, you would fold it in half twice, measure 30 inches from the center of the cloth, add 1 1/2 inches for the hem, and that is where you start your cut. You don't measure up from the bottom because you can't be sure if they added the hem before or after their measurement.
Is the 60 inches measured diagonally from corner to corner (as is a TV screen)? If the 60 inches is the length, then what is the width? Length times by the width will give you the square measurement of the table.
If 36 inches is the diameter the answer is: 7,068 square feet.