At 24 frames per second, it is 11 minutes, 3 seconds and 16 frames
Divide 1.5 miles by 45 minutes to get speed in miles per minute. Multiply by 5280 ft/mile to get feet per minute, then multiply by 60 minutes/hour to get to feet per hour. 1.5miles/45 minutes X 5280 feet/mile X 60 minutes/hour = 10,560 feet/hour
Jude ran 500 yards in 2 minutes how much is this in feet per second?
It would take 18 minutes for the snail to move 12 feet.
35 minutes
There are 5280 feet in one mile. Assuming a constant speed throughout the entire four minutes, they would run 5280/240 = 22 feet per second.
16mm = 1,6 cm.
5280 feet equal one mile. 5280 x 117 = 617,760 feet of film. 1 minute of film is 90 feet. 617,760 / 90 would be 6864 minutes. 6864 / 60 would be 114.4 hours of film.
There is no direct relationship between film and megapixel count. One is analog (film) the other digital. In terms of printing, the best you could expect out of a 16mm negative would be a decent 3 X 4" print, at the very most, and that would be out of a well-exposed, sharp negative. Even small digital files will print better.
The 1982 film "Tron" is 96 minutes. The 2010 film "Tron: Legacy" is 127 minutes.
1.6cm
1.6 cm
739.2 feet in six minutes at 1.4 mph
It depends on the quality of the film.
1 HOUR
110 minutes
The answer will depend on the size of the tiles. While the numbers are given, there are no units. So one 16 ft x 16 ft tile will be more than sufficient but you will need over 65 thousand tiles of size 16mm x 16mm.
Minutes is the unit of time whereas feet is the unit of length. So, there is no relation between these two.