Watts = Volts x Amps x Power factor
For an AC Unit I am guessing that your PF = .75 so we have 115 x 9.2 x .75 = 793.5 Watts.
There are zero amps in 50 watts. The equation for amperage is, I W/E. Amps = Watts / Volts. As you can see if there is no voltage stated the amperage can not be calculated.
Watts = Amps x Volts. This is the same as VA. So 2KVA is equal to 2000 watts.
Watts are the product of multiplying volts times amps.
If your generator is rated at 1000 watts continuous......and you are using 120V.....available amps are 1000/120 =8.3 .
volts = watts divided by amps amps = watts divided by volts watts = amps times volts so 266,000 watts divided by 380 volts = 700 amps and I might also point out that whatever it is you are talking about is very dangerous and can kill you in less than a heartbeat. I'd be sure to talk with an electrician if I were you if you plan on going anywhere near that.
When you multiply amps x volts the product is watts. Using this formula W = Amps x Volts should give you your answer.
Only when the load is purely resistive.
It depends on the voltage.Amps times volts equal watts
You need to know amps to answer this... Amps x Volts=watts
23.6 amps
When they give you WATTS the also give you VOLTS. Using some very simple math you can then figure out AMPS. WATTS = Amps x Volts
It depends on the current in amps. The watts would be equal to 5 times the current, because watts equals amps times volts.
volts times amps equal watts. So 12 volts times ? amp equals 1.5 watts. The current is 1.5/12 amps, which is 1/8 amp.
watts are equal to amps times volts.
There are zero volts in a watt. Watts are the product of amps x volts. As you can see there is not enough data given to answer the question. If you use this equation, Watts = Amps x Volts , you should be able to get the answer you are looking for.
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
As asked, the question cannot be answered. At 1 volt, 300 Watts = 300 Amps. At 10 volts, 300 Watts = 30 Amps. At 100 volts, 300 Watts = 3 Amps. At 120 volts, 300 Watts = 2.5 Amps. At 240 volts, 300 Watts = 1.25 Amps. To calculate the relationship between Amps, Volts and Watts, use the formula: Watts = Amps * volts